久久无码专区国产精品,国产亚洲视频免费播放,高级艳妇交换俱乐部小说 ,亚洲国产一区二区三区,亚洲av片在线免费观看

DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond)

DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond) 物性表: DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond)物性表及特性介紹,DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond)注塑參數詳情,如需DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond)下載, 可到相關下載區下載

密度 [g/cm3]: 1.45
吸水率 [%]: 5.5

Physical Properties	Metric	English	Comments

Density	1.45 g/cc	0.0524 lb/in3	(DAM); ISO 1183
Water Absorption	5.5 %	5.5 %	DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium	1.7 %	1.7 %	Humidity Absorption (DAM); Sim. to ISO 62

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	140 MPa	20300 psi	ISO 527-1/-2
Elongation at Break	4.5 %	4.5 %	ISO 527-1/-2
Tensile Modulus	8.50 GPa	1230 ksi	ISO 527-1/-2
Charpy Impact Unnotched	8.50 J/cm2 @Temperature -30.0 °C	40.5 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eU
	11.0 J/cm2 @Temperature 23.0 °C	52.4 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.50 J/cm2 @Temperature -30.0 °C	7.14 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eA
	3.40 J/cm2 @Temperature 23.0 °C	16.2 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	4.4 @Frequency 1e+6 Hz	4.4 @Frequency 1e+6 Hz	IEC 60250
	14 @Frequency 100 Hz	14 @Frequency 100 Hz	IEC 60250
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
Dissipation Factor	0.11 @Frequency 1e+6 Hz	0.11 @Frequency 1e+6 Hz	IEC 60250
	0.30 @Frequency 100 Hz	0.30 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	400 - 599 V	400 - 599 V	PLC 1; UL 746A
	500 V	500 V	IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	10°C/min (DAM); ISO 11357-1/-3
UL RTI, Electrical	140 °C @Thickness 1.50 mm	284 °F @Thickness 0.0591 in	UL746B
	140 °C @Thickness 0.710 mm	284 °F @Thickness 0.0280 in	UL746B
UL RTI, Mechanical with Impact	120 °C @Thickness 0.710 mm	248 °F @Thickness 0.0280 in	UL746B
	125 °C @Thickness 1.50 mm	257 °F @Thickness 0.0591 in	UL746B
UL RTI, Mechanical without Impact	140 °C @Thickness 0.710 mm	284 °F @Thickness 0.0280 in	UL746B
	150 °C @Thickness 1.50 mm	302 °F @Thickness 0.0591 in	UL746B

Descriptive Properties
Heat Stabilized or Stable to Heat	Yes
Injection Molding	Yes
Release Agent	Yes
With Fillers	Yes

關鍵詞:
供應
PA6
DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-46659.html

免責聲明: 本文 DSM Akulon? K224-HG8 Nylon 6-40% Glass Reinforced (European Grade) (Cond) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡