- 密度 [g/cm3]: 1.52
- 吸水率 [%]: 4.2
- 熱變形溫度 [℃]: 265.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.52 g/cc | 0.0549 lb/in3 | ISO 1183 | ||
| Water Absorption | 4.2 - 5.2 % | 4.2 - 5.2 % | ISO 62 | ||
| Moisture Absorption at Equilibrium | 0.80 - 1.2 % | 0.80 - 1.2 % | 50% RH; ISO 62 | ||
| Viscosity Measurement | 130 | 130 | ISO 307 | ||
| Linear Mold Shrinkage | 0.0047 cm/cm | 0.0047 in/in | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 3.00e+12 ohm-cm | 3.00e+12 ohm-cm | IEC 60093 | ||
| Dielectric Constant | 4.2 @Frequency 1.00e+6 Hz | 4.2 @Frequency 1.00e+6 Hz | IEC 60250 | ||
| Dissipation Factor | 0.038 @Frequency 1.00e+6 Hz | 0.038 @Frequency 1.00e+6 Hz | IEC 60250 | ||
| Comparative Tracking Index | 600 V | 600 V | IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 295 °C | 563 °F | ISO 3146 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 265 °C | 509 °F | ISO 75-2 | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 310 - 330 °C | 590 - 626 °F | Injection molding/Extrusion | ||
| Mold Temperature | 100 - 140 °C | 212 - 284 °F | Injection molding | ||
| Descriptive Properties | |||||
| Color | Black | ||||
| Commercial Status | Europe | ||||