• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA66
          4. 
            
        4. DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66
          5. 
        
        
        
        
            
        


                
        

                
        DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66
        
                
        DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66物性表及特性介紹,DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66注塑參數詳情,如需DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.16
          • 
                                
                                
        • 吸水率 [%]: 1.8
          • 
                                
                                
        • 成型收縮率 [%]: 0.008
          • 
                                
                                
        • 缺口沖擊強度: 0.43
          • 
                                
                                
        • 拉伸強度 [MPa]: 90.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 3.45
          • 
                                
                                
        • 熱變形溫度 [℃]: 230.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.15 g/cc1.15 g/ccDAM; ASTM D792
        

        Density 1.16 g/cc0.0419 lb/in3DAM; ISO 1183
        

        Water Absorption 1.8 %
        @Temperature 23.0 °C        		1.8 %
        @Temperature 73.4 °F        		Immersion 24h; DAM; ISO 62, Similar to
        

        Linear Mold Shrinkage  0.0080 cm/cm
        @Thickness 1.60 mm        		0.0080 in/in
        @Thickness 0.0630 in        		Flow; DAM
        

         0.0080 cm/cm
        @Thickness 1.60 mm        		0.0080 in/in
        @Thickness 0.0630 in        		Transverse; DAM
        

         0.011 cm/cm
        @Thickness 3.20 mm        		0.011 in/in
        @Thickness 0.126 in        		Flow; DAM
        

         0.011 cm/cm
        @Thickness 3.20 mm        		0.011 in/in
        @Thickness 0.126 in        		Transverse; DAM
        

        Linear Mold Shrinkage, Flow 0.0090 cm/cm
        @Thickness 2.00 mm        		0.0090 in/in
        @Thickness 0.0787 in        		Parallel; DAM; ISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.010 cm/cm
        @Thickness 2.00 mm        		0.010 in/in
        @Thickness 0.0787 in        		Normal; DAM; ISO 294-4
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 80.0 MPa
        @Temperature 23.0 °C        		11600 psi
        @Temperature 73.4 °F        		DAM; ISO 527
        

        Tensile Strength 89.6 MPa
        @Temperature 23.0 °C        		13000 psi
        @Temperature 73.4 °F        		DAM; ASTM D638
        

        Tensile Strength, Yield 90.0 MPa
        @Temperature 23.0 °C        		13100 psi
        @Temperature 73.4 °F        		50mm/min; DAM; ISO 527
        

        Elongation at Break  10 %
        @Temperature 23.0 °C        		10 %
        @Temperature 73.4 °F        		DAM; nominal; ISO 527
        

         10 %
        @Temperature 23.0 °C        		10 %
        @Temperature 73.4 °F        		DAM; ISO 527
        

         14 %
        @Temperature 23.0 °C        		14 %
        @Temperature 73.4 °F        		DAM; ASTM D638
        

        Elongation at Yield 4.0 %
        @Temperature 23.0 °C        		4.0 %
        @Temperature 73.4 °F        		50mm/min; DAM; ISO 527
        

        Tensile Modulus 3.75 GPa
        @Temperature 23.0 °C        		544 ksi
        @Temperature 73.4 °F        		DAM; ISO 527
        

        Flexural Modulus  3.45 GPa
        @Temperature 23.0 °C        		500 ksi
        @Temperature 73.4 °F        		DAM; ASTM D790
        

         3.66 GPa
        @Temperature 23.0 °C        		531 ksi
        @Temperature 73.4 °F        		DAM; ISO 178
        

        Izod Impact, Notched 0.430 J/cm
        @Temperature 23.0 °C        		0.806 ft-lb/in
        @Temperature 73.4 °F        		DAM; ASTM D256
        

        Charpy Impact Unnotched 13.5 J/cm2
        @Temperature 23.0 °C        		64.2 ft-lb/in2
        @Temperature 73.4 °F        		DAM; ISO 179/1eU
        

        Charpy Impact, Notched  0.300 J/cm2
        @Temperature -40.0 °C        		1.43 ft-lb/in2
        @Temperature -40.0 °F        		DAM; ISO 179/1eA
        

         0.370 J/cm2
        @Temperature 23.0 °C        		1.76 ft-lb/in2
        @Temperature 73.4 °F        		DAM; ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Comparative Tracking Index >= 600 V>= 600 VDAM; IEC 60112
        

         >= 600 V
        @Thickness 3.00 mm,
         Temperature 23.0 °C        		>= 600 V
        @Thickness 0.118 in,
         Temperature 73.4 °F        		DAM; UL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        Melting Point 264 °C507 °FDAM; ASTM D3418
        

        Deflection Temperature at 0.46 MPa (66 psi) 230 °C446 °FDAM; ASTM D648
        

         235 °C455 °FDAM; ISO 75-1/-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 70.0 °C158 °FDAM; ASTM D648
        

         84.0 °C183 °FDAM; ISO 75-1/-2
        

        UL RTI, Electrical  130 °C
        @Thickness 1.50 mm        		266 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

         130 °C
        @Thickness 3.00 mm        		266 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

         130 °C
        @Thickness 0.750 mm        		266 °F
        @Thickness 0.0295 in        		DAM; UL 746B
        

        UL RTI, Mechanical with Impact  75.0 °C
        @Thickness 0.750 mm        		167 °F
        @Thickness 0.0295 in        		DAM; UL 746B
        

         75.0 °C
        @Thickness 1.50 mm        		167 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

         75.0 °C
        @Thickness 3.00 mm        		167 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

        UL RTI, Mechanical without Impact  85.0 °C
        @Thickness 0.750 mm        		185 °F
        @Thickness 0.0295 in        		DAM; UL 746B
        

         85.0 °C
        @Thickness 1.50 mm        		185 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

         85.0 °C
        @Thickness 3.00 mm        		185 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

        Flammability, UL94  V-0
        @Thickness 0.750 mm        		V-0
        @Thickness 0.0295 in        		DAM; IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		DAM; IEC 60695-11-10
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		DAM; IEC 60695-11-10
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		DAM; UL94
        

         V-0
        @Thickness 0.750 mm        		V-0
        @Thickness 0.0295 in        		DAM; UL94
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		DAM; UL94
        

        Glow Wire Test  775 °C
        @Thickness 3.00 mm        		1430 °F
        @Thickness 0.118 in        		DAM; Ignition; IEC 60695-2-13
        

         775 °C
        @Thickness 1.50 mm        		1430 °F
        @Thickness 0.0591 in        		DAM; Ignition; IEC 60695-2-13
        

         960 °C
        @Thickness 1.50 mm        		1760 °F
        @Thickness 0.0591 in        		DAM; IEC 60695-2-12
        

         960 °C
        @Thickness 3.00 mm        		1760 °F
        @Thickness 0.118 in        		DAM; IEC 60695-2-12
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 260 °C500 °F10°C/min; DAM; ISO 11357-1/-3
        

         280 °C536 °FDAM; Optimum
        

         270 - 290 °C518 - 554 °FDAM
        

        Mold Temperature 70.0 °C158 °FDAM; optimum
        

         50.0 - 90.0 °C122 - 194 °FDAM
        

        Drying Temperature 80.0 °C176 °FDAM
        

        Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
        

        Moisture Content <= 0.20 %<= 0.20 %DAM
        

         
        Descriptive Properties
        AdditiveFlame RetardantDAM
         LubricantDAM
        AppearanceNatural ColorDAM
        Contains Flame RetardantYesDAM
        Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
        FeaturesCrystalline, SemiDAM
         Flame RetardantDAM
         NucleatedDAM
         Processability, GoodDAM
        Flame Retardant - Halogen/Red Phosphorus FreeYesDAM
        FormsPelletsDAM
        GenericNylon 66DAM
        Heat StabilizedYesDAM
        Material StatusCurrentDAM
        Part Marking Code>PA66-FR(30)<ISO 11469; DAM
        Polymer FamilyPolyamideDAM
        Polymer TypePA66DAM
        Processing MethodInjection MoldingDAM
        Product CategoryFlame Retardant ResinsDAM
         Unreinforced ResinsDAM
        Region Available - GlobalYesDAM
        Resin IdentificationPA66-FR(30)ISO 1043; DAM
        RoHS ComplianceContact ManufacturerDAM
        Ultrasonic WeldableYesDAM
        UsesConnectorsDAM
         Electrical PartsDAM
         Electrical/Electronic ApplicationsDAM
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-45527.html  
        
                    
        免責聲明: 本文 DuPont Performance Polymers Zytel? FR7025V0F NC010 Nylon 66 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
人妻少妇精品视频三区二区一区|
中文字幕在线日韩一区|
成人国产精品一区二区免费麻豆
|
国产美女直播亚洲一区色|
国产成人av免费观看|
国产亚洲欧洲av综合一区二区三区
|
换着玩人妻中文字幕|
亚洲色婷婷综合开心网|
三级三级三级a级全黄|
人妻精品动漫h无码|
2021AV在线无码最新|
好姑娘完整版在线观看|
蜜臀在线播放一区在线播放|
97精品伊人久久久大香线蕉|
久久久久青草线蕉亚洲|
日本精品中文字幕在线不卡|
99久久国产综合精品女图图等你|
少妇和邻居做不戴套视频|
女人喷液抽搐高潮视频|
免费无码肉片在线观看|
亚洲日韩精品制服丝袜AV|
久操热在线视频免费观看|
国产日韩欧美一区二区东京热|
国产精品熟妇视频国产偷人|
丁香婷婷无码不卡在线|
日本在线a一区视频高清视频|
日本一道本高清一区二区|
狠狠狠狠888|
天天澡日日澡狠狠欧美老妇|
精国产品一区二区三区a片|
四虎在线中文字幕一区|
久久大香国产成人av|
精品亚洲综合一区二区三区|
人人澡超碰碰97碰碰碰|
亚洲av激情一区二区|
日本熟妇色xxxxx日本免费看|
久久精品国产免费观看频道|
亚洲永久精品ww47永久入口|
毛片亚洲AV无码精品国产午夜|
国产一级三级三级在线视|
亚洲国产欧美日韩另类|