• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA66
          4. 
            
        4. DuPont Performance Polymers Zytel? 101 NC010 Nylon 66
          5. 
        
        
        
        
            
        


                
        

                
        DuPont Performance Polymers Zytel? 101 NC010 Nylon 66
        
                
        DuPont Performance Polymers Zytel? 101 NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel? 101 NC010 Nylon 66物性表及特性介紹,DuPont Performance Polymers Zytel? 101 NC010 Nylon 66注塑參數詳情,如需DuPont Performance Polymers Zytel? 101 NC010 Nylon 66下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.14
          • 
                                
                                
        • 吸水率 [%]: 1.2
          • 
                                
                                
        • 缺口沖擊強度: 0.27
          • 
                                
                                
        • 拉伸強度 [MPa]: 28.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 0.414
          • 
                                
                                
        • 硬度: 108.0
          • 
                                
                                
        • 熱變形溫度 [℃]: 200.0
          • 
                                
                                
        • 脆化溫度 [℃]: -80.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.14 g/cc1.14 g/ccDAM; ASTM D792
        

        Density 1.14 g/cc0.0412 lb/in3DAM; ISO 1183
        

        Water Absorption  1.2 %
        @Temperature 23.0 °C        		1.2 %
        @Temperature 73.4 °F        		Immersion 24h; DAM; ASTM D570
        

         2.6 %
        @Temperature 23.0 °C        		2.6 %
        @Temperature 73.4 °F        		Equilibrium 50%RH; DAM; ISO 62, Similar to
        

         8.5 %
        @Temperature 23.0 °C        		8.5 %
        @Temperature 73.4 °F        		Saturation; DAM; ASTM D570
        

         8.5 %
        @Temperature 23.0 °C        		8.5 %
        @Temperature 73.4 °F        		Saturation, immersed; DAM; ISO 62, Similar to
        

        Linear Mold Shrinkage 0.015 cm/cm
        @Thickness 3.20 mm        		0.015 in/in
        @Thickness 0.126 in        		Flow; DAM
        

        Linear Mold Shrinkage, Flow 0.014 cm/cm
        @Thickness 2.00 mm        		0.014 in/in
        @Thickness 0.0787 in        		Parallel; DAM; ISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.014 cm/cm
        @Thickness 2.00 mm        		0.014 in/in
        @Thickness 0.0787 in        		Normal; DAM; ISO 294-4
        

        Melt Index of Compound 24 g/10 min
        @Load 1.20 kg,
         Temperature 275 °C        		24 g/10 min
        @Load 2.65 lb,
         Temperature 527 °F        		DAM; cm3/10 min; ISO 1133
        

         
        Mechanical PropertiesMetricEnglishComments
        Hardness, Rockwell M 595950%RH; ASTM D785
        

         7979DAM; ASTM D785
        

        Hardness, Rockwell R 10810850%RH; ASTM D785
        

         121121DAM; ASTM D785
        

        Tensile Strength  38.0 MPa
        @Temperature 121 °C        		5510 psi
        @Temperature 250 °F        		50%RH; ASTM D638
        

         41.0 MPa
        @Temperature 77.0 °C        		5950 psi
        @Temperature 171 °F        		50%RH; ASTM D638
        

         43.0 MPa
        @Temperature 121 °C        		6240 psi
        @Temperature 250 °F        		DAM; ASTM D638
        

         62.0 MPa
        @Temperature 77.0 °C        		8990 psi
        @Temperature 171 °F        		DAM; ASTM D638
        

         77.0 MPa
        @Temperature 23.0 °C        		11200 psi
        @Temperature 73.4 °F        		50%RH; ASTM D638
        

         83.0 MPa
        @Temperature 23.0 °C        		12000 psi
        @Temperature 73.4 °F        		DAM; ASTM D638
        

         110 MPa
        @Temperature -40.0 °C        		16000 psi
        @Temperature -40.0 °F        		50%RH; ASTM D638
        

         114 MPa
        @Temperature -40.0 °C        		16500 psi
        @Temperature -40.0 °F        		DAM; ASTM D638
        

        Tensile Strength, Yield  28.0 MPa
        @Temperature 121 °C        		4060 psi
        @Temperature 250 °F        		50%RH; ASTM D638
        

         33.0 MPa
        @Temperature 121 °C        		4790 psi
        @Temperature 250 °F        		DAM; ASTM D638
        

         40.0 MPa
        @Temperature 77.0 °C        		5800 psi
        @Temperature 171 °F        		50%RH; ASTM D638
        

         45.0 MPa
        @Temperature 77.0 °C        		6530 psi
        @Temperature 171 °F        		DAM; ASTM D638
        

         55.0 MPa
        @Temperature 23.0 °C        		7980 psi
        @Temperature 73.4 °F        		50%RH; ISO 527
        

         58.0 MPa
        @Temperature 23.0 °C        		8410 psi
        @Temperature 73.4 °F        		50%RH; ASTM D638
        

         82.0 MPa
        @Temperature 23.0 °C        		11900 psi
        @Temperature 73.4 °F        		DAM; ISO 527
        

         83.0 MPa
        @Temperature 23.0 °C        		12000 psi
        @Temperature 73.4 °F        		DAM; ASTM D638
        

         110 MPa
        @Temperature -40.0 °C        		16000 psi
        @Temperature -40.0 °F        		50%RH; ASTM D638
        

         114 MPa
        @Temperature -40.0 °C        		16500 psi
        @Temperature -40.0 °F        		DAM; ASTM D638
        

        Elongation at Break  15 %
        @Temperature -40.0 °C        		15 %
        @Temperature -40.0 °F        		DAM; ASTM D638
        

         20 %
        @Temperature -40.0 °C        		20 %
        @Temperature -40.0 °F        		50%RH; ASTM D638
        

         25 %
        @Temperature 23.0 °C        		25 %
        @Temperature 73.4 °F        		DAM; nominal; ISO 527
        

         45 %
        @Temperature 23.0 °C        		45 %
        @Temperature 73.4 °F        		50mm/min; DAM; ISO 527
        

         >= 50 %
        @Temperature 23.0 °C        		>= 50 %
        @Temperature 73.4 °F        		50%RH; nominal; ISO 527
        

         60 %
        @Temperature 23.0 °C        		60 %
        @Temperature 73.4 °F        		DAM; ASTM D638
        

         >= 300 %
        @Temperature 23.0 °C        		>= 300 %
        @Temperature 73.4 °F        		50%RH; ASTM D638
        

         >= 300 %
        @Temperature 77.0 °C        		>= 300 %
        @Temperature 171 °F        		50%RH; ASTM D638
        

         >= 300 %
        @Temperature 77.0 °C        		>= 300 %
        @Temperature 171 °F        		DAM; ASTM D638
        

         >= 300 %
        @Temperature 121 °C        		>= 300 %
        @Temperature 250 °F        		50%RH; ASTM D638
        

         >= 300 %
        @Temperature 121 °C        		>= 300 %
        @Temperature 250 °F        		DAM; ASTM D638
        

        Elongation at Yield  4.0 %
        @Temperature -40.0 °C        		4.0 %
        @Temperature -40.0 °F        		DAM; ASTM D638
        

         4.5 %
        @Temperature 23.0 °C        		4.5 %
        @Temperature 73.4 °F        		DAM; ISO 527
        

         5.0 %
        @Temperature 23.0 °C        		5.0 %
        @Temperature 73.4 °F        		DAM; ASTM D638
        

         25 %
        @Temperature 23.0 °C        		25 %
        @Temperature 73.4 °F        		50%RH; ASTM D638
        

         25 %
        @Temperature 23.0 °C        		25 %
        @Temperature 73.4 °F        		50%RH; ISO 527
        

         30 %
        @Temperature 77.0 °C        		30 %
        @Temperature 171 °F        		50%RH; ASTM D638
        

         30 %
        @Temperature 77.0 °C        		30 %
        @Temperature 171 °F        		DAM; ASTM D638
        

         40 %
        @Temperature 121 °C        		40 %
        @Temperature 250 °F        		50%RH; ASTM D638
        

         45 %
        @Temperature 121 °C        		45 %
        @Temperature 250 °F        		DAM; ASTM D638
        

        Tensile Modulus  1.40 GPa
        @Temperature 23.0 °C        		203 ksi
        @Temperature 73.4 °F        		50%RH; ISO 527
        

         3.10 GPa
        @Temperature 23.0 °C        		450 ksi
        @Temperature 73.4 °F        		DAM; ISO 527
        

        Flexural Modulus  0.414 GPa
        @Temperature 121 °C        		60.0 ksi
        @Temperature 250 °F        		50%RH; ASTM D790
        

         0.538 GPa
        @Temperature 121 °C        		78.0 ksi
        @Temperature 250 °F        		DAM; ASTM D790
        

         0.565 GPa
        @Temperature 77.0 °C        		81.9 ksi
        @Temperature 171 °F        		50%RH; ASTM D790
        

         0.689 GPa
        @Temperature 77.0 °C        		99.9 ksi
        @Temperature 171 °F        		DAM; ASTM D790
        

         1.20 GPa
        @Temperature 23.0 °C        		174 ksi
        @Temperature 73.4 °F        		50%RH; ISO 178
        

         1.21 GPa
        @Temperature 23.0 °C        		175 ksi
        @Temperature 73.4 °F        		50%RH; ASTM D790
        

         2.80 GPa
        @Temperature 23.0 °C        		406 ksi
        @Temperature 73.4 °F        		DAM; ISO 178
        

         2.83 GPa
        @Temperature 23.0 °C        		410 ksi
        @Temperature 73.4 °F        		DAM; ASTM D790
        

         3.241 GPa
        @Temperature -40.0 °C        		470.1 ksi
        @Temperature -40.0 °F        		DAM; ASTM D790
        

         3.447 GPa
        @Temperature -40.0 °C        		499.9 ksi
        @Temperature -40.0 °F        		50%RH; ASTM D790
        

        Shear Strength 66.2 MPa
        @Temperature 23.0 °C        		9600 psi
        @Temperature 73.4 °F        		DAM; ASTM D732
        

        Izod Impact, Notched  0.270 J/cm
        @Temperature -40.0 °C        		0.506 ft-lb/in
        @Temperature -40.0 °F        		50%RH; ASTM D256
        

         0.320 J/cm
        @Temperature -40.0 °C        		0.599 ft-lb/in
        @Temperature -40.0 °F        		DAM; ASTM D256
        

         0.530 J/cm
        @Temperature 23.0 °C        		0.993 ft-lb/in
        @Temperature 73.4 °F        		DAM; ASTM D256
        

         1.12 J/cm
        @Temperature 23.0 °C        		2.10 ft-lb/in
        @Temperature 73.4 °F        		50%RH; ASTM D256
        

        Izod Impact, Notched (ISO)  5.50 kJ/m2
        @Temperature -40.0 °C        		2.62 ft-lb/in2
        @Temperature -40.0 °F        		DAM; ISO 180/1A
        

         5.50 kJ/m2
        @Temperature -30.0 °C        		2.62 ft-lb/in2
        @Temperature -22.0 °F        		DAM; ISO 180/1A
        

         5.50 kJ/m2
        @Temperature 23.0 °C        		2.62 ft-lb/in2
        @Temperature 73.4 °F        		DAM; ISO 180/1A
        

         12.0 kJ/m2
        @Temperature 23.0 °C        		5.71 ft-lb/in2
        @Temperature 73.4 °F        		50%RH; ISO 180/1A
        

        Izod Impact, Unnotched (ISO)  300 kJ/m2
        @Temperature -30.0 °C        		143 ft-lb/in2
        @Temperature -22.0 °F        		DAM; ISO 180/1U
        

         NB
        @Temperature 23.0 °C        		NB
        @Temperature 73.4 °F        		DAM; ISO 180/1U
        

         NB
        @Temperature 23.0 °C        		NB
        @Temperature 73.4 °F        		50%RH; ISO 180/1U
        

        Charpy Impact Unnotched  40.0 J/cm2
        @Temperature -30.0 °C        		190 ft-lb/in2
        @Temperature -22.0 °F        		DAM; ISO 179/1eU
        

         NB
        @Temperature -30.0 °C        		NB
        @Temperature -22.0 °F        		50%RH; ISO 179/1eU
        

         NB
        @Temperature 23.0 °C        		NB
        @Temperature 73.4 °F        		DAM; ISO 179/1eU
        

         NB
        @Temperature 23.0 °C        		NB
        @Temperature 73.4 °F        		50%RH; ISO 179/1eU
        

        Charpy Impact, Notched  0.300 J/cm2
        @Temperature -40.0 °C        		1.43 ft-lb/in2
        @Temperature -40.0 °F        		DAM; ISO 179/1eA
        

         0.300 J/cm2
        @Temperature -30.0 °C        		1.43 ft-lb/in2
        @Temperature -22.0 °F        		50%RH; ISO 179/1eA
        

         0.450 J/cm2
        @Temperature -30.0 °C        		2.14 ft-lb/in2
        @Temperature -22.0 °F        		DAM; ISO 179/1eA
        

         0.550 J/cm2
        @Temperature 23.0 °C        		2.62 ft-lb/in2
        @Temperature 73.4 °F        		DAM; ISO 179/1eA
        

         1.50 J/cm2
        @Temperature 23.0 °C        		7.14 ft-lb/in2
        @Temperature 73.4 °F        		50%RH; ISO 179/1eA
        

        Tensile Impact Strength  158 kJ/m2
        @Temperature 23.0 °C        		75.2 ft-lb/in2
        @Temperature 73.4 °F        		DAM; Short specimen; ASTM D1822
        

         232 kJ/m2
        @Temperature 23.0 °C        		110 ft-lb/in2
        @Temperature 73.4 °F        		50%RH; Short specimen; ASTM D1822
        

         504 kJ/m2
        @Temperature 23.0 °C        		240 ft-lb/in2
        @Temperature 73.4 °F        		DAM; Long specimen; ASTM D1822
        

         1470 kJ/m2
        @Temperature 23.0 °C        		699 ft-lb/in2
        @Temperature 73.4 °F        		50%RH; Long specimen; ASTM D1822
        

        Tensile Creep Modulus, 1 hour 1200 MPa
        @Temperature 23.0 °C        		174000 psi
        @Temperature 73.4 °F        		50%RH; ISO 899
        

        Tensile Creep Modulus, 1000 hours 700 MPa
        @Temperature 23.0 °C        		102000 psi
        @Temperature 73.4 °F        		50%RH; ISO 899
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity  1.00e+13 ohm-cm
        @Temperature 23.0 °C        		1.00e+13 ohm-cm
        @Temperature 73.4 °F        		50%RH; ASTM D257
        

         1.00e+13 ohm-cm
        @Temperature 23.0 °C        		1.00e+13 ohm-cm
        @Temperature 73.4 °F        		50%RH; IEC 60093
        

         1.00e+15 ohm-cm
        @Temperature 23.0 °C        		1.00e+15 ohm-cm
        @Temperature 73.4 °F        		DAM; ASTM D257
        

         1.00e+15 ohm-cm
        @Temperature 23.0 °C        		1.00e+15 ohm-cm
        @Temperature 73.4 °F        		DAM; IEC 60093
        

        Dielectric Constant  3.6
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.6
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		DAM; ASTM D150
        

         3.8
        @Frequency 100 Hz,
         Temperature 23.0 °C        		3.8
        @Frequency 100 Hz,
         Temperature 73.4 °F        		DAM; IEC 60250
        

         3.9
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		DAM; ASTM D150
        

         4.0
        @Frequency 100 Hz,
         Temperature 23.0 °C        		4.0
        @Frequency 100 Hz,
         Temperature 73.4 °F        		DAM; ASTM D150
        

         4.6
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		4.6
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		50%RH; ASTM D150
        

         6.0
        @Frequency 100 Hz,
         Temperature 23.0 °C        		6.0
        @Frequency 100 Hz,
         Temperature 73.4 °F        		50%RH; IEC 60250
        

         7.0
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		7.0
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		50%RH; ASTM D150
        

         8.0
        @Frequency 100 Hz,
         Temperature 23.0 °C        		8.0
        @Frequency 100 Hz,
         Temperature 73.4 °F        		50%RH; ASTM D150
        

        Dielectric Strength 18.1 kV/mm
        @Thickness 3.20 mm        		460 kV/in
        @Thickness 0.126 in        		DAM; Short Time; ASTM D149
        

        Dissipation Factor  0.010
        @Frequency 100 Hz,
         Temperature 23.0 °C        		0.010
        @Frequency 100 Hz,
         Temperature 73.4 °F        		DAM; ASTM D150
        

         0.020
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.020
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		DAM; ASTM D150
        

         0.020
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.020
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		DAM; ASTM D150
        

         0.10
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.10
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		50%RH; ASTM D150
        

         0.20
        @Frequency 100 Hz,
         Temperature 23.0 °C        		0.20
        @Frequency 100 Hz,
         Temperature 73.4 °F        		50%RH; ASTM D150
        

         0.20
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.20
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		50%RH; ASTM D150
        

        Comparative Tracking Index  >= 600 V
        @Thickness 3.00 mm,
         Temperature 23.0 °C        		>= 600 V
        @Thickness 0.118 in,
         Temperature 73.4 °F        		DAM; UL 746A
        

         >= 600 V
        @Thickness 3.00 mm,
         Temperature 23.0 °C        		>= 600 V
        @Thickness 0.118 in,
         Temperature 73.4 °F        		DAM; UL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow 500 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Temperature 73.4 - 131 °F        		DAM; ASTM E 831
        

        CTE, linear, Transverse to Flow 110 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		61.1 μin/in-°F
        @Temperature 73.4 - 131 °F        		DAM; ASTM E 831
        

        Melting Point 262 °C504 °FDAM; ASTM D3418
        

        Deflection Temperature at 0.46 MPa (66 psi) 200 °C392 °FDAM; ISO 75-1/-2
        

         210 °C410 °FDAM; ASTM D648
        

        Deflection Temperature at 1.8 MPa (264 psi) 65.0 °C149 °FDAM; ASTM D648
        

         70.0 °C158 °FDAM; ISO 75-1/-2
        

        Brittleness Temperature -80.0 °C-112 °FDAM; ASTM D746
        

         -65.0 °C-85.0 °F50%RH; ASTM D746
        

        UL RTI, Electrical  130 °C
        @Thickness 0.710 mm        		266 °F
        @Thickness 0.0280 in        		DAM; UL 746B
        

         130 °C
        @Thickness 3.00 mm        		266 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

         130 °C
        @Thickness 6.00 mm        		266 °F
        @Thickness 0.236 in        		DAM; UL 746B
        

         130 °C
        @Thickness 1.50 mm        		266 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

        UL RTI, Mechanical with Impact  75.0 °C
        @Thickness 0.710 mm        		167 °F
        @Thickness 0.0280 in        		DAM; UL 746B
        

         75.0 °C
        @Thickness 3.00 mm        		167 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

         75.0 °C
        @Thickness 6.00 mm        		167 °F
        @Thickness 0.236 in        		DAM; UL 746B
        

         75.0 °C
        @Thickness 1.50 mm        		167 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

        UL RTI, Mechanical without Impact  85.0 °C
        @Thickness 0.710 mm        		185 °F
        @Thickness 0.0280 in        		DAM; UL 746B
        

         85.0 °C
        @Thickness 3.00 mm        		185 °F
        @Thickness 0.118 in        		DAM; UL 746B
        

         85.0 °C
        @Thickness 6.00 mm        		185 °F
        @Thickness 0.236 in        		DAM; UL 746B
        

         85.0 °C
        @Thickness 1.50 mm        		185 °F
        @Thickness 0.0591 in        		DAM; UL 746B
        

        Flammability, UL94  V-2
        @Thickness 6.00 mm        		V-2
        @Thickness 0.236 in        		DAM; IEC 60695-11-10
        

         V-2
        @Thickness 0.710 mm        		V-2
        @Thickness 0.0280 in        		DAM; IEC 60695-11-10
        

         V-2
        @Thickness 1.50 mm        		V-2
        @Thickness 0.0591 in        		DAM; IEC 60695-11-10
        

         V-2
        @Thickness 3.00 mm        		V-2
        @Thickness 0.118 in        		DAM; IEC 60695-11-10
        

         V-2
        @Thickness 1.50 mm        		V-2
        @Thickness 0.0591 in        		DAM; UL94
        

         V-2
        @Thickness 3.00 mm        		V-2
        @Thickness 0.118 in        		DAM; UL94
        

         V-2
        @Thickness 6.00 mm        		V-2
        @Thickness 0.236 in        		DAM; UL94
        

         V-2
        @Thickness 0.710 mm        		V-2
        @Thickness 0.0280 in        		DAM; UL94
        

        Oxygen Index 28 %28 %DAM; ASTM D2863
        

         28 %28 %DAM; ISO 4589-1/-2
        

         31 %31 %50%RH; ASTM D2863
        

        Glow Wire Test  725 °C
        @Thickness 0.710 mm        		1340 °F
        @Thickness 0.0280 in        		DAM; Ignition; IEC 60695-2-13
        

         750 °C
        @Thickness 1.50 mm        		1380 °F
        @Thickness 0.0591 in        		DAM; Ignition; IEC 60695-2-13
        

         800 °C
        @Thickness 3.00 mm        		1470 °F
        @Thickness 0.118 in        		DAM; Ignition; IEC 60695-2-13
        

         960 °C
        @Thickness 0.710 mm        		1760 °F
        @Thickness 0.0280 in        		DAM; IEC 60695-2-12
        

         960 °C
        @Thickness 1.50 mm        		1760 °F
        @Thickness 0.0591 in        		DAM; IEC 60695-2-12
        

         960 °C
        @Thickness 3.00 mm        		1760 °F
        @Thickness 0.118 in        		DAM; IEC 60695-2-12
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 262 °C504 °F10°C/min; DAM; ISO 11357-1/-3
        

         290 °C554 °FDAM; Optimum
        

         280 - 300 °C536 - 572 °FDAM
        

        Mold Temperature 70.0 °C158 °FDAM; optimum
        

         50.0 - 90.0 °C122 - 194 °FDAM
        

        Drying Temperature 80.0 °C176 °FDAM
        

        Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
        

        Moisture Content <= 0.20 %<= 0.20 %DAM
        

         
        Descriptive Properties
        AppearanceNatural ColorDAM
        Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
        Extrudable - FilamentYesDAM
        FeaturesChemical Resistance, GoodDAM
         Electrical Properties, GoodDAM
         Wear Resistance, GoodDAM
        FormsPelletsDAM
        GenericNylon 66DAM
        Material StatusCurrentDAM
        Part Marking Code>PA66<ISO 11469; DAM
        Polymer FamilyPolyamideDAM
        Polymer TypePA66DAM
        Processing MethodExtrusionDAM
         Injection MoldingDAM
        Product CategoryExtrusion ResinsDAM
         Unreinforced ResinsDAM
        Region Available - GlobalYesDAM
        Resin IdentificationPA66ISO 1043; DAM
        RoHS ComplianceContact ManufacturerDAM
        Ultrasonic WeldableYesDAM
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-45423.html  
        
                    
        免責聲明: 本文 DuPont Performance Polymers Zytel? 101 NC010 Nylon 66 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
国产精品亚洲А∨怡红院|
日日夜夜噜噜视频|
少妇乳大丰满在线播放|
天天综合网站|
中文字幕日韩一区二区不卡
|
美乳丰满人妻无码视频|
欧乱色国产精品兔费视频|
亚洲av无码成人影院一区|
精品熟女少妇免费久久|
日本一区二区在免费观看喷水|
亚洲精品视频久久偷拍|
国产一区二区精品高清在线观看|
久久精品成人免费看|
蜜芽久久人人超碰爱香蕉|
亚洲精品一品二品av|
99久久无色码中文字幕|
日本午夜精品一区二区三区电影
|
欧美大胆老熟妇乱子伦视频|
国产精品人妻久久毛片高清无卡
|
日韩亚洲中文图片小说|
成人无码视频|
日本夜爽爽一区二区三区|
久久综合综合久久综合|
亚洲男人在线天堂|
性一交一乱一伦一|
亚洲 成人 无码 在线观看|
亚洲AV成人片不卡无码|
久女女热精品视频在线观看|
9久久伊人精品综合|
性欧美三级在线观看|
秋霞电影网久久久精品|
国产毛片片精品天天看视频|
在线无码午夜福利高潮视频|
国产一区二区不卡在线看|
94人妻少妇偷人精品|
人妻丝袜中文无码av影音先锋|
午夜福利日本一区二区无码|
色窝视频在线在线视频|
丰满少妇被猛烈进出69影院|
亚洲精品成人久久av|
国产精品 第一页第二页|