- 密度 [g/cm3]: 1.5
- 吸水率 [%]: 5.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.50 g/cc | 0.0542 lb/in3 | (DAM); ISO 1183 | ||
| Water Absorption | 5.0 % | 5.0 % | (DAM); Sim. to ISO 62 | ||
| Moisture Absorption at Equilibrium | 1.1 % | 1.1 % | Humidity Absorption (DAM); Sim. to ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | DAM; ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | Normal (DAM); ISO 294-4 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 76.0 MPa | 11000 psi | ISO 527-1/-2 | ||
| Elongation at Break | 6.0 % | 6.0 % | ISO 527-1/-2 | ||
| Tensile Modulus | 5.00 GPa | 725 ksi | ISO 527-1/-2 | ||
| Charpy Impact, Notched | 0.290 J/cm2 @Temperature -30.0 °C | 1.38 ft-lb/in2 @Temperature -22.0 °F | ISO 179/1eA | ||
| 0.620 J/cm2 @Temperature 23.0 °C | 2.95 ft-lb/in2 @Temperature 73.4 °F | ISO 179/1eA | |||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 260 °C | 500 °F | 10°C/min (DAM); ISO 11357-1/-3 | ||
| Descriptive Properties | |||||
| Injection Molding | Yes | ||||
| Lubricants | Yes | ||||
| Release agent | Yes | ||||
| With fillers | Yes | ||||