- 吸水率 [%]: 1.9
- 缺口沖擊強度: 1.37
- 拉伸強度 [MPa]: 118.0
- 彎曲模量 [MPa]: 5.00
- 硬度: 110.0
- 熱變形溫度 [℃]: 250.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.39 g/cc | 1.39 g/cc | Dry; ASTM D792 |
| Water Absorption | 1.9 % | 1.9 % | Wet |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | Dry; ASTM D2863 |
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | Dry; ASTM D2863 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 68 | 68 | Wet; ASTM D785 |
| 93 | 93 | Dry; ASTM D785 | |
| Hardness, Rockwell R | 110 | 110 | Wet; ASTM D785 |
| 120 | 120 | Dry; ASTM D785 | |
| Tensile Strength, Yield | 118 MPa | 17100 psi | Wet; ASTM D638 |
| 181 MPa | 26300 psi | Dry; ASTM D638 | |
| Elongation at Break | 3.0 % | 3.0 % | Dry; ASTM D638 |
| 7.0 % | 7.0 % | Wet; ASTM D638 | |
| Flexural Strength | 167 MPa | 24200 psi | Wet; ASTM D790 |
| 289 MPa | 41900 psi | Dry; ASTM D790 | |
| Flexural Modulus | 5.00 GPa | 725 ksi | Wet; ASTM D790 |
| 9.10 GPa | 1320 ksi | Dry; ASTM D790 | |
| Izod Impact, Notched | 1.37 J/cm | 2.57 ft-lb/in | Dry; ASTM D256 |
| 1.96 J/cm | 3.67 ft-lb/in | Wet; ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 30.0 μm/m-°C @Temperature 20.0 °C | 16.7 μin/in-°F @Temperature 68.0 °F | Dry; ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 250 °C | 482 °F | Dry; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 240 °C | 464 °F | Dry; ASTM D648 |
| Flammability, UL94 | HB | HB | Dry |