• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA66
          4. 
            
        4. Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled
          5. 
        
        
        
        
            
        


                
        

                
        Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled
        
                
        Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled 物性表: Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled物性表及特性介紹,Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled注塑參數詳情,如需Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.36
          • 
                                
                                
        • 吸水率 [%]: 1.25
          • 
                                
                                
        • 彎曲模量 [MPa]: 8.80
          • 
                                
                                
        • 熱變形溫度 [℃]: 260.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.36 g/cc
        @Temperature 23.0 °C        		0.0491 lb/in3
        @Temperature 73.4 °F        		ISO 1183
        

        Filler Content 30 %30 %ISO 1172
        

        Water Absorption 1.25 %1.25 %
        

          1.9 - 2.1 %
        @Temperature 23.0 °C        		1.9 - 2.1 %
        @Temperature 73.4 °F        		50% r.h.; ISO 62
        

        Water Absorption at Saturation 5.2 - 5.8 %
        @Time 82800 sec        		5.2 - 5.8 %
        @Time 23.0 hour        		ISO 62
        

        Linear Mold Shrinkage, Flow 0.0018 cm/cm0.0018 in/inISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0128 cm/cm0.0128 in/inISO 294-4
        

        Spiral Flow 830 cm327 inCross Section: 7[mm]x3.5[mm]; AKRO
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 200 MPa29000 psi5 [mm/min]; ISO 527-1/2
        

          100 MPa
        @Temperature 160 - 175 °C,
         Time 1.80e+7 sec        		14500 psi
        @Temperature 320 - 347 °F,
         Time 5000 hour        		5 [mm/min], 50% Loss of Tensile Strength; ICE 216
        

         100 MPa
        @Temperature 130 - 150 °C,
         Time 7.20e+7 sec        		14500 psi
        @Temperature 266 - 302 °F,
         Time 20000 hour        		5 [mm/min], 50% Loss of Tensile Strength; ICE 216
        

        Tensile Stress 130 MPa18900 psi
        

        Elongation at Break 3.0 %3.0 %5 [mm/min]; ISO 527-1/2
        

        Tensile Modulus 7.00 GPa1020 ksi
        

         10.0 GPa1450 ksi1[mm/min]; ISO 527-1/2
        

        Flexural Strength 285 MPa41300 psi2 [mm/min]; ISO 178
        

        Flexural Modulus 8.80 GPa1280 ksi2 [mm/min]; ISO 178
        

        Charpy Impact Unnotched  8.00 J/cm2
        @Temperature -30.0 °C        		38.1 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

         8.50 J/cm2
        @Temperature 23.0 °C        		40.4 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

        Charpy Impact, Notched 1.30 J/cm26.19 ft-lb/in2
        

          1.10 J/cm2
        @Temperature -30.0 °C        		5.23 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         1.20 J/cm2
        @Temperature 23.0 °C        		5.71 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity 1.00e+13 ohm-cm1.00e+13 ohm-cmIEC 60093
        

        Surface Resistance 1.00e+12 ohm1.00e+12 ohmIEC 60093
        

        Comparative Tracking Index 550 V550 VTest Solution A; IEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow 19.0 μm/m-°C
        @Temperature 23.0 - 80.0 °C        		10.6 μin/in-°F
        @Temperature 73.4 - 176 °F        		ISO 11359-1/2
        

        CTE, linear, Transverse to Flow 95.0 μm/m-°C
        @Temperature 23.0 - 80.0 °C        		52.8 μin/in-°F
        @Temperature 73.4 - 176 °F        		ISO 11359-1/2
        

        Melting Point 262 °C504 °FISO 11357-1/3
        

        Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FHDT/B; ISO 75-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 255 °C491 °FHDT/A; ISO 75-2
        

        Deflection Temperature at 8.0 MPa 210 °C410 °FHDT/C; ISO 75-2
        

        Flammability, UL94 HB
        @Thickness 1.60 mm        		HB
        @Thickness 0.0630 in
        

        Glow Wire Test 650 °C
        @Thickness 1.60 mm        		1200 °F
        @Thickness 0.0630 in        		ICE 60695-12
        

         
        Processing PropertiesMetricEnglishComments
        Feed Temperature 60.0 - 80.0 °C140 - 176 °F
        

        Nozzle Temperature 280 - 295 °C536 - 563 °F
        

        Zone 1 260 - 300 °C500 - 572 °F
        

        Zone 2 260 - 300 °C500 - 572 °F
        

        Zone 3 260 - 300 °C500 - 572 °F
        

        Zone 4 260 - 300 °C500 - 572 °F
        

        Melt Temperature 280 - 320 °C536 - 608 °F
        

        Mold Temperature 80.0 - 100 °C176 - 212 °F
        

        Drying Temperature 80.0 °C176 °F
        

        Dry Time 4 - 12.0 hour4 - 12.0 hour
        

        Injection Pressure 100 MPa14500 psi
        

        Hold Pressure 75.0 MPa10900 psi
        

        Back Pressure 0.400 - 1.00 MPa58.0 - 145 psi
        

         
        Descriptive Properties
        Rate acc. FMVSS 302 (<100/min)Passed
        Rate acc. FMVSS 302,(<100/min)FMVSS 302, >1 [mm] Thickness
        Resistance to  Oleic acidPass100% Conc. at 23°C
        Resistance to AcetaldehydeFail40% Conc. at 23°C
        Resistance to Acetic AcidPass20% Conc. at 23°C
        Resistance to AcetonePass100% Conc. at 23°C
        Resistance to AcetonitrilePass100% Conc. at 23°C
        Resistance to AcrylonitrilePass100% Conc. at 23°C
        Resistance to Allyl alcoholFail96% Conc. at 23°C
        Resistance to Amyl alcoholPass100% Conc. at 23°C
        Resistance to Aqueous AmmoniaPass10% Conc. at 23°C
        Resistance to BenzeneFail100% Conc. at 40°C
         Pass100% Conc. at 23°C
         Pass100% Conc. at 23°C
        Resistance to BiodieselPass100% Conc. at 23°C
        Resistance to Boric acidFail100% Conc. at 23°C
         Pass10% Conc. at 23°C
        Resistance to Brake fluid (DOT 4)Fail100% Conc. at 130°C
         Pass100% Conc. at 23°C
        Resistance to Calcium chloride, alcoholicFail10% Conc. at 23°C
        Resistance to Calcium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Carbonic acidPass100% Conc. at 60°C
        Resistance to Caustic potash solution, aqueousPass50% Conc. at 23°C
        Resistance to Chloracetic acidFail50% Conc. at 23°C
        Resistance to ChlorineFail100% Conc. at 23°C
        Resistance to Chlorine waterFail100% Conc. at 23°C
        Resistance to Chromic acidFail10% Conc. at 23°C
        Resistance to CyclohexanePass100% Conc. at 23°C
        Resistance to CyclohexanolPass100% Conc. at 23°C
        Resistance to Dichloro-Acetic acidFail50% Conc. at 23°C
        Resistance to Diesel fuel (DIN 51601)Pass100% Conc. at 23°C
        Resistance to EthanolPass96% Conc. at 23°C
        Resistance to Ethylene glycol/waterFail50% Conc. at 120°C
        Resistance to Formaldehyde, aqueousPass10% Conc. at 23°C
        Resistance to Formic acidFail2% Conc. at 23°C
        Resistance to GlycerinPass100% Conc. at 23°C
        Resistance to Hydraulic oil H and HL (DIN 51524)Pass100% Conc. at 100°C
        Resistance to Hydrogen chloride, gasFail100% Conc. at 23°C
        Resistance to Iso-octanolPass100% Conc. at 23°C
        Resistance to IsopropanolPass100% Conc. at 23°C
        Resistance to MethanolPass100% Conc. at 23°C
        Resistance to Methylene chlorideFail100% Conc. at 23°C
        Resistance to Motor oil (SAE 10W-40)Pass100% Conc. at 130°C
         Pass100% Conc. at 23°C
        Resistance to Natural GasPass100% Conc. at 23°C
        Resistance to Nitric acidFail40% Conc. at 23°C
        Resistance to OzoneFail100% Conc. at 23°C
        Resistance to PhenolFail100% Conc. at 23°C
        Resistance to Phosphoric acidFail30% Conc. at 23°C
        Resistance to Potassium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Potassium permanganate, aqueousFail10% Conc. at 23°C
        Resistance to Sodium chloride, aqueousPass10% Conc. at 23°C
        Resistance to Sodium hydroxide solution, aqueousPass1% Conc. at 23°C
        Resistance to Sodium hypochlorite, aqueousFail10% Conc. at 23°C
        Resistance to Transmission oil (ATF m 1375.4)Pass100% Conc. at 150°C
        Resistance to Urea, aqueousPass20% Conc. at 23°C
        Resistant to Carbon disulphidePass100% Conc. at 23°C
        Resistant to Carbon tetrachloridePass100% Conc. at 23°C
        Resistant to Citric acidPass10% Conc. at 23°C
        Resistant to Ethyl acetatePass100% Conc. at 23°C
        Resistant to Hydrochloric acidFail36% Conc. at 23°C
        Resistant to Hydrogen peroxideFail23°C
        Resistant to SeawaterPass100% Conc. at 23°C
        Resistant to Silicone fluidPass23°C
        Resistant to Sulphuric acidFail96% Conc. at 23°C
        Resistant to Super-grade petrol (DIN 51600)Pass100% Conc. at 23°C
        Resistant to ToluolPass100% Conc. at 23°C
        Resistant to WaterPass100% Conc. up to 50°C
        Resistant to XylolPass100% Conc. at 23°C
        Resistant to Zinc chloride, aqueousFail50% Conc. at 23°C
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-44829.html  
        
                    
        免責聲明: 本文 Akro-Plastic Akromid? A3 GF 30 (2397) PA 6.6 Dry, 30% Glass Filled 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
自拍偷区亚洲综合第二区|
精品人妻系列无码人妻漫画|
国产精品日韩精品日韩|
久久国产精品精品国产色|
亚洲a人片在线观看网址|
亚洲av日韩av永久无码电影|
好男人社区资源|
国产成人亚洲综合无码18禁h|
欧美成人www在线观看|
色哟哟国产成人精品|
国产超碰无码最新上传|
国产亚洲综合另类色专区|
亚洲精品第一区二区三区|
国产一区在线观看不卡|
日本熟妇XXXX潮喷视频|
国产69精品久久久久久妇女迅雷|
久久成人国产精品免费软件|
亚洲色大成网站www永久男同
|
亚洲αⅴ无码乱码在线观看性色|
欧美在线一区二区三区精品|
夜爽8888视频在线观看|
久久国产精品偷任你爽任你|
婷婷中文字幕|
在线观看热码亚洲av每日更新|
国产乱色熟女一二三四区|
国产第一区二区三区精品|
中文字幕在线精品国产|
国内精品久久久久影院蜜芽
|
久久久无码精品亚洲日韩蜜臀浪潮|
久热天堂在线视频精品伊人
|
亚洲精品一区二区天堂|
日韩高清亚洲日韩精品一区二区|
欧美不卡无线在线一二三区观|
国产AV无码专区亚洲AWWW|
AVtt手机版天堂网国产|
亚洲国产欧美日韩另类|
少妇人妻精品无码专区视频|
亚洲啪啪精品一区二区的|
色九月亚洲综合网|
国产精品久久久久久久9999|
久久一级精品久熟女人妻|