- 密度 [g/cm3]: 1.29
- 吸水率 [%]: 6.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.29 g/cc | 0.0466 lb/in3 | ISO 1183 | ||
| Water Absorption | 6.0 % | 6.0 % | ISO 62 | ||
| Moisture Absorption | 2.00 % | 2.00 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0020 cm/cm | 0.0020 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 96.0 MPa | 13900 psi | conditioned; ISO 2039-1 | ||
| 206 MPa | 29900 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 90.0 MPa | 13100 psi | conditioned; ISO 527-1/-2 | ||
| 155 MPa | 22500 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 3.7 % | 3.7 % | dry; ISO 527-1/-2 | ||
| 7.4 % | 7.4 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 4.60 GPa | 667 ksi | conditioned; ISO 527-1/-2 | ||
| 7.90 GPa | 1150 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 8.00 J/cm2 | 38.1 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| 10.0 J/cm2 | 47.6 ft-lb/in2 | dry; ISO 179/1eU | |||
| 7.30 J/cm2 @Temperature 30.0 °C | 34.7 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.40 J/cm2 | 6.66 ft-lb/in2 | dry; ISO 179/1eA | ||
| 2.00 J/cm2 | 9.52 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 0.900 J/cm2 @Temperature 30.0 °C | 4.28 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 1.00 J/cm2 @Temperature 30.0 °C | 4.76 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | dry; IEC 60093 | |||
| Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 | ||
| Dielectric Strength | 30.0 kV/mm | 762 kV/in | conditioned; IEC 60243-1 | ||
| 35.0 kV/mm | 889 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | dry; IEC 60112 | ||
| 600 V | 600 V | conditioned; IEC 60112 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 100 μm/m-°C | 55.6 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS | ||
| 180 °C | 356 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 225 °C | 437 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 85.0 °C | 185 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Interior | ||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Connectors | ||||
| Electrical appliances | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Special Characteristics | High impact or impact modified | ||||