- 密度 [g/cm3]: 1.35
- 吸水率 [%]: 5.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.35 g/cc | 0.0488 lb/in3 | ISO 1183 | ||
| Water Absorption | 5.0 % | 5.0 % | ISO 62 | ||
| Moisture Absorption | 2.00 % | 2.00 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm | 0.0060 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 110 MPa | 16000 psi | conditioned; ISO 2039-1 | ||
| 210 MPa | 30500 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 125 MPa | 18100 psi | conditioned; ISO 527-1/-2 | ||
| 190 MPa | 27600 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 3.0 % | 3.0 % | dry; ISO 527-1/-2 | ||
| 8.0 % | 8.0 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 6.00 GPa | 870 ksi | conditioned; ISO 527-1/-2 | ||
| 9.70 GPa | 1410 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 7.00 J/cm2 | 33.3 ft-lb/in2 | dry; ISO 179/1eU | ||
| 8.00 J/cm2 | 38.1 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 6.00 J/cm2 @Temperature 30.0 °C | 28.6 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 6.00 J/cm2 @Temperature 30.0 °C | 28.6 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.00 J/cm2 | 4.76 ft-lb/in2 | dry; ISO 179/1eA | ||
| 1.20 J/cm2 | 5.71 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 0.600 J/cm2 @Temperature 30.0 °C | 2.86 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 0.700 J/cm2 @Temperature 30.0 °C | 3.33 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | dry; IEC 60093 | |||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 21.0 kV/mm | 533 kV/in | conditioned; IEC 60243-1 | ||
| 25.0 kV/mm | 635 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 475 V | 475 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 70.0 μm/m-°C | 38.9 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 100 - 120 °C | 212 - 248 °F | long term; EMS | ||
| 230 °C | 446 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 235 °C | 455 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 155 °C | 311 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Electrical appliances | ||||
| Electrical equipment | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Mechanical Engineering | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||