- 熔體流動速率 [g/10min]: 3.0
- 密度 [g/cm3]: 1.2
- 吸水率 [%]: 1.3
- 缺口沖擊強度: 6.0
- 拉伸強度 [MPa]: 45.0
- 斷裂伸長率 [%]: 155
- 彎曲強度 [MPa]: 55.0
- 彎曲模量 [MPa]: 4.90
- 熱變形溫度 [℃]: 210.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.20 - 1.37 g/cc | 0.0434 - 0.0495 lb/in3 | Average value: 1.26 g/cc Grade Count:16 |
| Water Absorption | 1.30 - 8.00 % | 1.30 - 8.00 % | Average value: 5.51 % Grade Count:8 |
| Moisture Absorption at Equilibrium | 2.00 - 3.00 % | 2.00 - 3.00 % | Average value: 2.36 % Grade Count:8 |
| Viscosity Measurement | 0.190 - 155 | 0.190 - 155 | Average value: 95.1 Grade Count:6 |
| Linear Mold Shrinkage | 0.00100 - 0.0140 cm/cm | 0.00100 - 0.0140 in/in | Average value: 0.00486 cm/cm Grade Count:10 |
| Linear Mold Shrinkage, Transverse | 0.00190 - 0.0100 cm/cm | 0.00190 - 0.0100 in/in | Average value: 0.00669 cm/cm Grade Count:8 |
| Melt Flow | 3.00 - 157 g/10 min | 3.00 - 157 g/10 min | Average value: 80.6 g/10 min Grade Count:4 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 77.0 - 88.0 | 77.0 - 88.0 | Average value: 82.3 Grade Count:6 |
| Ball Indentation Hardness | 75.0 - 210 MPa | 10900 - 30500 psi | Average value: 141 MPa Grade Count:6 |
| Tensile Strength, Ultimate | 55.0 - 135 MPa | 7980 - 19600 psi | Average value: 103 MPa Grade Count:14 |
| Tensile Strength, Yield | 45.0 - 95.0 MPa | 6530 - 13800 psi | Average value: 70.0 MPa Grade Count:3 |
| Elongation at Break | 2.00 - 10.0 % | 2.00 - 10.0 % | Average value: 4.72 % Grade Count:10 |
| Elongation at Yield | 3.00 - 10.0 % | 3.00 - 10.0 % | Average value: 5.82 % Grade Count:7 |
| Modulus of Elasticity | 2.70 - 8.56 GPa | 392 - 1240 ksi | Average value: 5.19 GPa Grade Count:16 |
| Flexural Yield Strength | 155 - 200 MPa | 22500 - 29000 psi | Average value: 172 MPa Grade Count:3 |
| Flexural Modulus | 4.90 - 8.32 GPa | 711 - 1210 ksi | Average value: 6.41 GPa Grade Count:3 |
| Izod Impact, Notched (ISO) | 6.00 - 16.0 kJ/m2 | 2.86 - 7.61 ft-lb/in2 | Average value: 10.5 kJ/m2 Grade Count:4 |
| Charpy Impact Unnotched | 2.50 - 9.00 J/cm2 | 11.9 - 42.8 ft-lb/in2 | Average value: 5.27 J/cm2 Grade Count:16 |
| 2.50 - 7.00 J/cm2 @Temperature -40.0 - 30.0 °C | 11.9 - 33.3 ft-lb/in2 @Temperature -40.0 - 86.0 °F | Average value: 4.63 J/cm2 Grade Count:9 | |
| Charpy Impact, Notched | 0.500 - 1.70 J/cm2 | 2.38 - 8.09 ft-lb/in2 | Average value: 0.892 J/cm2 Grade Count:14 |
| 0.400 - 0.800 J/cm2 @Temperature -20.0 - 30.0 °C | 1.90 - 3.81 ft-lb/in2 @Temperature -4.00 - 86.0 °F | Average value: 0.517 J/cm2 Grade Count:7 | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+11 - 1.00e+15 ohm-cm | 1.00e+11 - 1.00e+15 ohm-cm | Average value: 2.88e+14 ohm-cm Grade Count:12 |
| Surface Resistance | 1.00e+10 - 1.00e+15 ohm | 1.00e+10 - 1.00e+15 ohm | Average value: 1.67e+14 ohm Grade Count:6 |
| Dielectric Strength | 25.0 - 40.0 kV/mm | 635 - 1020 kV/in | Average value: 31.6 kV/mm Grade Count:10 |
| Comparative Tracking Index | 500 - 600 V | 500 - 600 V | Average value: 572 V Grade Count:14 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 20.0 - 45.0 μm/m-°C | 11.1 - 25.0 μin/in-°F | Average value: 32.0 μm/m-°C Grade Count:10 |
| CTE, linear, Transverse to Flow | 75.0 - 110 μm/m-°C | 41.7 - 61.1 μin/in-°F | Average value: 91.7 μm/m-°C Grade Count:6 |
| Melting Point | 240 - 310 °C | 464 - 590 °F | Average value: 257 °C Grade Count:15 |
| Maximum Service Temperature, Air | 90.0 - 240 °C | 194 - 464 °F | Average value: 154 °C Grade Count:7 |
| Deflection Temperature at 0.46 MPa (66 psi) | 210 - 215 °C | 410 - 419 °F | Average value: 213 °C Grade Count:3 |
| Deflection Temperature at 1.8 MPa (264 psi) | 180 - 270 °C | 356 - 518 °F | Average value: 222 °C Grade Count:14 |
| Deflection Temperature at 8.0 MPa | 60.0 - 100 °C | 140 - 212 °F | Average value: 78.3 °C Grade Count:6 |
| Flammability, UL94 | HB - V-0 | HB - V-0 | Grade Count:9 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 250 - 300 °C | 482 - 572 °F | Average value: 270 °C Grade Count:4 |
| Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | Average value: 68.8 °C Grade Count:4 |