- 密度 [g/cm3]: 2.175
- 彎曲強度 [MPa]: 39.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.175 g/cc | 0.07858 lb/in3 | ASTM D792 |
| Apparent Bulk Density | 0.390 g/cc | 0.0141 lb/in3 | ASTM D4894 |
| Water Absorption | 0.00 % | 0.00 % | ASTM D570 |
| Linear Mold Shrinkage | 0.030 cm/cm | 0.030 in/in | Radial shrinkage of 10 cm o.d. sintered rod at 23°C |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 39.0 MPa | 5660 psi | ASTM D638 |
| Elongation at Break | 370 % | 370 % | ASTM D638 |
| Coefficient of Friction, Dynamic | 0.060 | 0.060 | ASTM D1894 |
| Coefficient of Friction, Static | 0.080 | 0.080 | ASTM D1894 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+18 ohm-cm | 1.00e+18 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.1 @Frequency 60.0 - 2.00e+9 Hz | 2.1 @Frequency 60.0 - 2.00e+9 Hz | ASTM D150 |
| Dielectric Strength | 70.0 kV/mm | 1780 kV/in | Estimated from similar grades. ASTM D149 |
| Dissipation Factor | >= 0.00030 @Frequency 60.0 - 2.00e+9 Hz | >= 0.00030 @Frequency 60.0 - 2.00e+9 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.240 W/m-K | 1.67 BTU-in/hr-ft2-°F | ASTM C177 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous Service |
| Flammability, UL94 | V-0 | V-0 | VE-0 |
| Oxygen Index | >= 95 % | >= 95 % | ASTM D2863 |