- 吸水率 [%]: 0.01
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.21 - 2.23 g/cc | 2.21 - 2.23 g/cc | ASTM D792 |
| Water Absorption | 0.010 % | 0.010 % | ASTM D570 |
| Deformation | 4.0 - 5.5 % | 4.0 - 5.5 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
| 9.0 - 11.5 % | 9.0 - 11.5 % | ASTM D621 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 57 - 61 | 57 - 61 | ASTM D2240 |
| Ball Indentation Hardness | 50.0 - 55.0 MPa | 7250 - 7980 psi | ISO 2032-N132 |
| Tensile Strength at Break | >= 12.0 MPa | >= 1740 psi | ASTM D4894 |
| Elongation at Break | >= 160 % | >= 160 % | ASTM D4894 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.340 W/m-K | 2.36 BTU-in/hr-ft2-°F | ASTM C 177 |
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -140 °C | -220 °F | DSC |
| Flammability, UL94 | V-0 | V-0 | |