- 密度 [g/cm3]: 2.38
- 吸水率 [%]: 0.04
- 彎曲模量 [MPa]: 2.59
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 2.38 g/cc | 0.0860 lb/in3 | ASTM D792 Method A | ||
| Water Absorption | 0.040 % | 0.040 % | IPC TM-650 2.6.2.2 | ||
| Thickness | 0.0610 microns | 0.00240 mil | After lamination | ||
| 0.0813 microns | 0.00320 mil | As received | |||
| 1.57 microns | 0.0620 mil | Thickness of laminate tested | |||
| Outgassing - Total Mass Loss | 0.00 % @Pressure <=1.33e-10 MPa, Temperature 125 °C | 0.00 % @Pressure <=1.93e-8 psi, Temperature 257 °F | Collected Volatiles; NASA SP-R-0022A | ||
| 0.00 % @Pressure <=1.33e-10 MPa, Temperature 125 °C | 0.00 % @Pressure <=1.93e-8 psi, Temperature 257 °F | Water Vapor Recovered; NASA SP-R-0022A | |||
| 0.020 % @Pressure <=1.33e-10 MPa, Temperature 125 °C | 0.020 % @Pressure <=1.93e-8 psi, Temperature 257 °F | NASA SP-R-0022A | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength | 48.3 MPa | 7000 psi | Cross; ASTM D882 | ||
| 56.5 MPa | 8200 psi | Machine; ASTM D882 | |||
| Modulus of Elasticity | 3.19 GPa | 462 ksi | Cross; ASTM D638 | ||
| 3.25 GPa | 471 ksi | Machine; ASTM D638 | |||
| Flexural Modulus | >= 2.59 GPa | >= 375 ksi | ASTM D790 | ||
| Compressive Modulus | 1.55 GPa | 225 ksi | ASTM D695 | ||
| Peel Strength | 1.23 kN/m | 7.00 pli | After Thermal Stress; IPC TM-650 2.4.8 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.40e+14 ohm-cm | 1.40e+14 ohm-cm | C96/35/90; IPC TM-650 2.5.17.1 | ||
| Surface Resistance | 1.30e+12 ohm | 1.30e+12 ohm | C96/35/90; IPC TM-650 2.5.17.1 | ||
| Dielectric Constant | 2.94 @Frequency 1.00e+10 Hz | 2.94 @Frequency 1.00e+10 Hz | C23/50; IPC TM-650 2.5.5.5 | ||
| Dielectric Breakdown | >= 45000 V | >= 45000 V | D48/50; ASTM D149 | ||
| Dissipation Factor | 0.0025 @Frequency 1.00e+10 Hz | 0.0025 @Frequency 1.00e+10 Hz | C23/50; IPC TM-650 2.5.5.5 | ||
| Arc Resistance | >= 180 sec | >= 180 sec | D48/50; ASTM D495 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 10.0 μm/m-°C @Temperature 0.000 - 100 °C | 5.56 μin/in-°F @Temperature 32.0 - 212 °F | x direction; IPC TM-650 2.4.24 | ||
| 12.0 μm/m-°C @Temperature 0.000 - 100 °C | 6.67 μin/in-°F @Temperature 32.0 - 212 °F | y direction; IPC TM-650 2.4.24 | |||
| CTE, linear, Transverse to Flow | 35.0 μm/m-°C @Temperature 0.000 - 100 °C | 19.4 μin/in-°F @Temperature 32.0 - 212 °F | z direction; IPC TM-650 2.4.24 | ||
| Thermal Conductivity | 0.500 W/m-K @Temperature 100 °C | 3.47 BTU-in/hr-ft2-°F @Temperature 212 °F | ASTM E1225 | ||
| Flammability, UL94 | V-0 | V-0 | Vertical Burn | ||
| Descriptive Properties | |||||
| Temperature Coefficient of Dielectric (ppm/°C) | -12 | IPC TM-650 2.5.5.5 (-10 - 140°C) | |||