- 吸水率 [%]: 0.03
- 缺口沖擊強(qiáng)度: 1.6
- 斷裂伸長(zhǎng)率 [%]: 55.2
- 彎曲模量 [MPa]: 2.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.78 g/cc | 1.78 g/cc | ASTM D792 | ||
| Water Absorption | 0.030 % | 0.030 % | Immersion, 24hr; ASTM D570(2) | ||
| Water Absorption at Saturation | 0.050 % | 0.050 % | Immersion; ASTM D570(2) | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 75 | 75 | ASTM D785 | ||
| Hardness, Shore D | 78 | 78 | ASTM D2240 | ||
| Tensile Strength | 48.3 MPa | 7000 psi | ASTM D638 | ||
| Elongation at Break | 100 % | 100 % | ASTM D638 | ||
| Tensile Modulus | 2.07 GPa | 300 ksi | ASTM D638 | ||
| Flexural Yield Strength | 55.2 MPa | 8000 psi | ASTM D790 | ||
| Flexural Modulus | 2.00 GPa | 290 ksi | ASTM D790 | ||
| Compressive Strength | 68.9 MPa | 10000 psi | 10% Def.; ASTM D695 | ||
| Compressive Modulus | 1.10 GPa | 160 ksi | ASTM D695 | ||
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256 Type A | ||
| Electrical Properties | Metric | English | Comments | ||
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 | ||
| Dielectric Constant | 6.4 @Frequency 1e+6 Hz | 6.4 @Frequency 1e+6 Hz | ASTM D150 | ||
| Dielectric Strength | 10.2 kV/mm | 260 kV/in | Short Term; ASTM D149 | ||
| Dissipation Factor | 0.165 @Frequency 1e+6 Hz | 0.165 @Frequency 1e+6 Hz | ASTM D150 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 119 μm/m-°C @Temperature -40.0 - 149 °C | 66.0 μin/in-°F @Temperature -40.0 - 300 °F | ASTM E831 | ||
| Thermal Conductivity | 0.216 W/m-K | 1.50 BTU-in/hr-ft2-°F | ASTM F433 | ||
| Melting Point | 171 °C | 340 °F | Crystalline, Peak; ASTM D3418 | ||
| Maximum Service Temperature, Air | 149 °C | 300 °F | Long Term | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 110 °C | 230 °F | ASTM D648 | ||
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) | ||
| Compliance Properties | Metric | English | Comments | ||
| 3A-Dairy | Yes | Yes | |||
| Canada AG | No | No | |||
| FDA | Yes | Yes | |||
| NSF | Yes | Yes | |||
| USDA | Yes | Yes | |||
| USP Class VI | Yes | Yes | |||
| Chemical Resistance Properties | Metric | English | Comments | ||
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |||
| Acids, Weak | Acceptable | Acceptable | |||
| Alcohols | Acceptable | Acceptable | |||
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |||
| Alkalies, Weak | Limited | Limited | |||
| Chlorinated Solvents | Limited | Limited | |||
| Conductive / Static Dissipative | No | No | |||
| Continuous Sunlight | Limited | Limited | |||
| Hot Water / Steam | Acceptable | Acceptable | |||
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |||
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |||
| Inorganic Salt Solutions | Acceptable | Acceptable | |||
| Ketones, Esters | Unacceptable | Unacceptable | |||
| Descriptive Properties | |||||
| Color | Natural | ||||
| Machinability | 3 | 1-10, 1=Easier to Machine | |||