- 密度 [g/cm3]: 0.94
- 吸水率 [%]: 0.01
- 拉伸強度 [MPa]: 20.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 0.940 g/cc | 0.0340 lb/in3 | ISO 1183 | ||
| Water Absorption at Saturation | 0.010 % | 0.010 % | in water at 23°C; ISO 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 40.0 MPa | 5800 psi | value at 30 sec.; ISO 2039-1 | ||
| Tensile Strength, Yield | 20.0 MPa | 2900 psi | v = 50 mm/min; ISO 527-2 | ||
| Elongation at Break | >= 50 % | >= 50 % | ISO 527-2 | ||
| Tensile Modulus | 0.800 GPa | 116 ksi | ISO 527-2 | ||
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU | ||
| Electrical Properties | Metric | English | Comments | ||
| Electrical Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | IEC 60093 | ||
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | IEC 60093 | ||
| Dielectric Constant | 2.3 @Frequency 100 Hz | 2.3 @Frequency 100 Hz | IEC 60250 | ||
| 3.0 @Frequency 1e+6 Hz | 3.0 @Frequency 1e+6 Hz | IEC 60250 | |||
| Dielectric Strength | 45.0 kV/mm | 1140 kV/in | in transformer oil; IEC 60243-1 | ||
| Dissipation Factor | 0.00040 @Frequency 100 Hz | 0.00040 @Frequency 100 Hz | IEC 60250 | ||
| 0.0010 @Frequency 1e+6 Hz | 0.0010 @Frequency 1e+6 Hz | IEC 60250 | |||
| Comparative Tracking Index | 600 V | 600 V | IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 200 μm/m-°C @Temperature 20.0 °C | 111 μin/in-°F @Temperature 68.0 °F | ISO 11359 | ||
| Thermal Conductivity | 0.410 W/m-K | 2.85 BTU-in/hr-ft2-°F | |||
| Melting Point | 135 °C | 275 °F | 10K/min; ISO 3146 | ||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Long Term | ||
| 120 °C | 248 °F | Short term | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 42.0 °C | 108 °F | ISO 75-2 | ||
| Vicat Softening Point | 80.0 °C | 176 °F | VST/B/50; ISO 306 | ||
| Minimum Service Temperature, Air | -200 °C | -328 °F | |||
| Flammability, UL94 | HB @Thickness 3.00 mm | HB @Thickness 0.118 in | |||
| HB @Thickness 6.00 mm | HB @Thickness 0.236 in | ||||
| Descriptive Properties | |||||
| Food Compliance | yes | BGVV | |||
| yes | FD A | ||||