• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PTT
          4. 
            
        4. DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT)
          5. 
        
        
        
        
            
        


                
        

                
        DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT)
        
                
        DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT) 物性表: DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT)物性表及特性介紹,DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT)注塑參數詳情,如需DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT)下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.4
          • 
                                
                                
        • 吸水率 [%]: 0.08
          • 
                                
                                
        • 彎曲模量 [MPa]: 5.80
          • 
                                
                                
        • 熱變形溫度 [℃]: 223.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.40 g/cc0.0506 lb/in3ISO 1183
        

        Water Absorption 0.080 %
        @Temperature 23.0 °C        		0.080 %
        @Temperature 73.4 °F        		Immersion 24h; ISO 62, Similar to
        

        Linear Mold Shrinkage, Flow  0.0020 cm/cm
        @Thickness 2.00 mm        		0.0020 in/in
        @Thickness 0.0787 in        		Mold  80°C; ISO 294-4
        

         0.0030 cm/cm
        @Thickness 3.00 mm        		0.0030 in/in
        @Thickness 0.118 in        		Mold  80°C; ISO 294-4
        

         0.0040 cm/cm
        @Thickness 4.00 mm        		0.0040 in/in
        @Thickness 0.157 in        		Mold  80°C; ISO 294-4
        

        Linear Mold Shrinkage, Transverse  0.0070 cm/cm
        @Thickness 2.00 mm        		0.0070 in/in
        @Thickness 0.0787 in        		Mold  80°C; ISO 294-4
        

         0.0070 cm/cm
        @Thickness 3.00 mm        		0.0070 in/in
        @Thickness 0.118 in        		Mold  80°C; ISO 294-4
        

         0.010 cm/cm
        @Thickness 4.00 mm        		0.010 in/in
        @Thickness 0.157 in        		Mold  80°C; ISO 294-4
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 125 MPa
        @Temperature 23.0 °C        		18100 psi
        @Temperature 73.4 °F        		ISO 527
        

        Elongation at Break 3.0 %
        @Temperature 23.0 °C        		3.0 %
        @Temperature 73.4 °F        		ISO 527
        

        Tensile Modulus 6.50 GPa
        @Temperature 23.0 °C        		943 ksi
        @Temperature 73.4 °F        		ISO 527
        

        Flexural Strength 190 MPa
        @Temperature 23.0 °C        		27600 psi
        @Temperature 73.4 °F        		ISO 178
        

        Flexural Modulus 5.80 GPa
        @Temperature 23.0 °C        		841 ksi
        @Temperature 73.4 °F        		ISO 178
        

        Charpy Impact Unnotched  2.50 J/cm2
        @Temperature 23.0 °C        		11.9 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

         3.00 J/cm2
        @Temperature -30.0 °C        		14.3 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

        Charpy Impact, Notched  0.550 J/cm2
        @Temperature 23.0 °C        		2.62 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         0.600 J/cm2
        @Temperature -30.0 °C        		2.86 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity 2.00e+16 ohm-cm
        @Temperature 23.0 °C        		2.00e+16 ohm-cm
        @Temperature 73.4 °F        		IEC 60093
        

        Surface Resistance 1.00e+14 ohm
        @Temperature 23.0 °C        		1.00e+14 ohm
        @Temperature 73.4 °F        		IEC 60093
        

        Dielectric Constant  3.7
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.7
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		IEC 60250
        

         3.9
        @Frequency 100 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 100 Hz,
         Temperature 73.4 °F        		IEC 60250
        

         3.9
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		IEC 60250
        

        Dielectric Strength  27.0 kV/mm
        @Thickness 2.00 mm,
         Temperature 23.0 °C        		686 kV/in
        @Thickness 0.0787 in,
         Temperature 73.4 °F        		IEC 60243-1
        

         27.0 kV/mm
        @Thickness 2.00 mm,
         Temperature 90.0 °C        		686 kV/in
        @Thickness 0.0787 in,
         Temperature 194 °F        		IEC 60243-1
        

         36.0 kV/mm
        @Thickness 1.00 mm,
         Temperature 23.0 °C        		914 kV/in
        @Thickness 0.0394 in,
         Temperature 73.4 °F        		IEC 60243-1
        

         36.0 kV/mm
        @Thickness 1.00 mm,
         Temperature 90.0 °C        		914 kV/in
        @Thickness 0.0394 in,
         Temperature 194 °F        		IEC 60243-1
        

        Dissipation Factor  0.0015
        @Frequency 100 Hz,
         Temperature 23.0 °C        		0.0015
        @Frequency 100 Hz,
         Temperature 73.4 °F        		IEC 60250
        

         0.0027
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.0027
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		IEC 60250
        

        Comparative Tracking Index 250 V
        @Temperature 23.0 °C        		250 V
        @Temperature 73.4 °F        		IEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow  500 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		278 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         500 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         500 μm/m-°C
        @Temperature 55.0 - 160 °C        		278 μin/in-°F
        @Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  74.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		41.1 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         89.0 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		49.4 μin/in-°F
        @Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         132 μm/m-°C
        @Temperature 55.0 - 160 °C        		73.3 μin/in-°F
        @Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        Deflection Temperature at 0.46 MPa (66 psi) 223 °C433 °FISO 75-1/-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 200 °C392 °FISO 75-1/-2
        

        Flammability, UL94  HB
        @Thickness 0.750 mm        		HB
        @Thickness 0.0295 in        		IEC 60695-11-10
        

         HB
        @Thickness 1.50 mm        		HB
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         HB
        @Thickness 3.00 mm        		HB
        @Thickness 0.118 in        		IEC 60695-11-10
        

         HB
        @Thickness 3.00 mm        		HB
        @Thickness 0.118 in        		UL94
        

         HB
        @Thickness 1.50 mm        		HB
        @Thickness 0.0591 in        		UL94
        

         HB
        @Thickness 0.750 mm        		HB
        @Thickness 0.0295 in        		UL94
        

        Oxygen Index 19 %19 %ISO 4589-1/-2
        

        Glow Wire Test  650 °C
        @Thickness 1.50 mm        		1200 °F
        @Thickness 0.0591 in        		IEC 60695-2-12
        

         675 °C
        @Thickness 0.850 mm        		1250 °F
        @Thickness 0.0335 in        		IEC 60695-2-12
        

         675 °C
        @Thickness 1.50 mm        		1250 °F
        @Thickness 0.0591 in        		Ignition; IEC 60695-2-13
        

         700 °C
        @Thickness 3.00 mm        		1290 °F
        @Thickness 0.118 in        		IEC 60695-2-12
        

         700 °C
        @Thickness 0.850 mm        		1290 °F
        @Thickness 0.0335 in        		Ignition; IEC 60695-2-13
        

         725 °C
        @Thickness 3.00 mm        		1340 °F
        @Thickness 0.118 in        		Ignition; IEC 60695-2-13
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 227 °C441 °F10°C/min; ISO 11357-1/-3
        

         260 °C500 °FOptimum
        

         250 - 270 °C482 - 518 °F
        

        Mold Temperature 80.0 - 110 °C176 - 230 °F
        

         100 °C212 °Foptimum
        

        Drying Temperature 120 °C248 °F
        

        Dry Time 4.00 hour4.00 hour
        

        Moisture Content <= 0.020 %<= 0.020 %
        

         
        Descriptive Properties
        AppearanceNatural Color
        FormsPellets
        GenericPolytrimethylene Terephthalate (PTT)
        Material StatusCurrent
        Part Marking Code>PTT-GF15<ISO 11469
        Processing MethodInjection Molding
        Product CategoryGlass Reinforced Resins
         Renewably Sourced Resins
        Region Available - GlobalYes
        Resin IdentificationPTT-GF15ISO 1043
        RoHS ComplianceContact Manufacturer
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-39715.html  
        
                    
        免責聲明: 本文 DuPont Performance Polymers Sorona? 3015GV NC010 Polytrimethylene Terephthalate (PTT) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
久久亚洲精精品中文字幕|
欧美日韩国产综合草草|
免费无码午夜福利片|
欧美成年视频在线观看|
久久精品国产亚洲av麻豆软件|
国产精品亚洲一区二区毛片|
日韩精品久久不卡中文字幕|
国产精品久久久一区二区三区|
成av免费大片黄在线观看|
日本高清免费不卡视频|
国产裸体美女视频全黄|
日本一道本高清一区二区|
久久99精品久久久久久齐齐百度|
亚洲尤码不卡av麻豆|
爱如潮水在线观看视频|
国产99精品成人午夜在线|
久久这里只精品国产2|
国产无套内射又大又猛又粗又爽|
免费a级毛片18以上观看精品|
西西午夜无码大胆啪啪国模|
亚洲人成电影在线天堂色|
国产又黄又猛又粗又爽的a片动漫|
亚洲精品一区二区18禁|
中文字幕国产精品中文字幕|
日韩av一区二区不卡在线|
国产一区二区日韩在线|
亚洲 成人 无码 在线观看|
国产日韩精品一区二区在线观看播放|
精品人妻中文av一区二区三区|
国产在线不卡精品网站|
国产做a爱免费视频在线观看
|
久久久精品无码一二三区|
亚洲一区中文字幕人妻|
91福利国产在线观一区二区|
日韩中文字幕亚洲精品|
天天干天天射天天操|
九九热在线精品免费视频|
一边亲着一面膜的免费版电视剧
|
亚洲精品日本一区二区|
毛片内射久久久一区|
欧美亚洲另类制服卡通动漫|