- 熔體流動速率 [g/10min]: 6.0
- 吸水率 [%]: 0.15
- 拉伸強(qiáng)度 [MPa]: 53.9
- 斷裂伸長率 [%]: 78.5
- 彎曲模量 [MPa]: 1.96
- 硬度: 118.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.23 g/cc | 1.23 g/cc | ASTM D792 |
| Water Absorption | 0.15 % @Time 86400 sec | 0.15 % @Time 24.0 hour | ASTM D570 |
| Linear Mold Shrinkage | 0.0070 - 0.012 cm/cm @Thickness 3.00 mm | 0.0070 - 0.012 in/in @Thickness 0.118 in | ASTM D955 |
| Melt Flow | 6.0 g/10 min @Load 5.00 kg, Temperature 250 °C | 6.0 g/10 min @Load 11.0 lb, Temperature 482 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 118 | 118 | ASTM D785 |
| Tensile Strength, Yield | 53.9 MPa | 7820 psi | ASTM D638 |
| Elongation at Break | 120 % | 120 % | ASTM D638 |
| Flexural Yield Strength | 78.5 MPa | 11400 psi | ASTM D790 |
| Flexural Modulus | 1.96 GPa | 284 ksi | ASTM D790 |
| Izod Impact, Unnotched | 7.85 J/cm @Thickness 3.17 mm | 14.7 ft-lb/in @Thickness 0.125 in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.00e+16 ohm-cm | 3.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.0 @Frequency 1.00e+6 Hz | 3.0 @Frequency 1.00e+6 Hz | ASTM D150 |
| Dielectric Strength | 23.0 kV/mm | 584 kV/in | ASTM D149 |
| Dissipation Factor | 0.0090 @Frequency 1.00e+6 Hz | 0.0090 @Frequency 1.00e+6 Hz | ASTM D150 |
| Arc Resistance | 121 sec | 121 sec | ASTM D495 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 83.0 μm/m-°C | 46.1 μin/in-°F | ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 116 °C | 241 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.59 mm | HB @Thickness 0.0625 in | |
| Processing Properties | Metric | English | Comments |
| Rear Barrel Temperature | 230 - 250 °C | 446 - 482 °F | |
| Middle Barrel Temperature | 220 - 240 °C | 428 - 464 °F | |
| Front Barrel Temperature | 210 - 230 °C | 410 - 446 °F | |
| Nozzle Temperature | 240 - 250 °C | 464 - 482 °F | |
| Melt Temperature | 240 - 250 °C | 464 - 482 °F | |
| Drying Temperature | 120 °C | 248 °F | |
| Dry Time | 3 - 5 hour | 3 - 5 hour | |
| Moisture Content | <= 0.020 % | <= 0.020 % | |
| Screw Speed | 30 - 80 rpm | 30 - 80 rpm | |
- 關(guān)鍵詞:
- PET
- 供應(yīng)
- Samyang Triloy? 410 PC/PET alloy