国产成人精品无人区一区,在线看片免费不卡人成视频,2020久久国产综合精品swag,男女性高爱潮免费网站,国产成人无码免费视频麻豆

Kingfa PBT-RG20 Flame Retardant, 20% Glass Fiber Reinforced PBT

Kingfa PBT-RG20 Flame Retardant, 20% Glass Fiber Reinforced PBT 物性表: Kingfa PBT-RG20 Flame Retardant, 20% Glass Fiber Reinforced PBT物性表及特性介紹,Kingfa PBT-RG20 Flame Retardant, 20% Glass Fiber Reinforced PBT注塑參數詳情,如需Kingfa PBT-RG20 Flame Retardant, 20% Glass Fiber Reinforced PBT下載, 可到相關下載區下載

吸水率 [%]: 0.07
缺口沖擊強度: 0.8
彎曲模量 [MPa]: 6.00
硬度: 120.0
熱變形溫度 [℃]: 216.0

Physical Properties	Metric	English	Comments

Specific Gravity	1.57 g/cc @Temperature 23.0 °C	1.57 g/cc @Temperature 73.4 °F	ASTM D792
Water Absorption	0.070 % @Temperature 23.0 °C, Time 86400 sec	0.070 % @Temperature 73.4 °F, Time 24.0 hour	ASTM D570
Linear Mold Shrinkage	0.0040 - 0.010 cm/cm @Temperature 23.0 °C	0.0040 - 0.010 in/in @Temperature 73.4 °F	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	120	120	ASTM D785
Tensile Strength at Break	105 MPa	15200 psi	10mm/min; ASTM D638
Elongation at Break	3.0 %	3.0 %	10mm/min; ASTM D638
Flexural Strength	155 MPa	22500 psi	2mm/min; ASTM D790
Flexural Modulus	6.00 GPa	870 ksi	2mm/min; ASTM D790
Izod Impact, Notched	0.800 J/cm @Thickness 3.20 mm, Temperature 23.0 °C	1.50 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F	ASTM D256

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	216 °C @Thickness 6.40 mm	421 °F @Thickness 0.252 in	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	208 °C @Thickness 6.40 mm	406 °F @Thickness 0.252 in	ASTM D648
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in
	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in

Processing Properties	Metric	English	Comments
Processing Temperature	<= 265 °C	<= 509 °F
Rear Barrel Temperature	220 - 240 °C	428 - 464 °F	Start Point: 235°C
Middle Barrel Temperature	235 - 255 °C	455 - 491 °F	Start Point: 245°C
Front Barrel Temperature	240 - 265 °C	464 - 509 °F	Start Point: 255°C
Melt Temperature	240 - 260 °C	464 - 500 °F	Start Point: 250°C
Mold Temperature	50.0 - 70.0 °C	122 - 158 °F	Start Point: 60°C
Drying Temperature	120 - 140 °C @Time 14400 - 21600 sec	248 - 284 °F @Time 4.00 - 6.00 hour	Pre-dry

Descriptive Properties
Glass Fiber Content (%)	20
Injection Speed	Moderate to High

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-38617.html

免責聲明: 本文 Kingfa PBT-RG20 Flame Retardant, 20% Glass Fiber Reinforced PBT 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡