- 密度 [g/cm3]: 1.82
- 吸水率 [%]: 0.08
- 缺口沖擊強度: 18.7
- 斷裂伸長率 [%]: 455
- 彎曲強度 [MPa]: 241.0
- 彎曲模量 [MPa]: 18.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.82 g/cc | 0.0658 lb/in3 | ASTM D792 |
| Water Absorption | 0.080 % | 0.080 % | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 241 MPa | 35000 psi | ASTM D638 |
| Flexural Yield Strength | 455 MPa | 66000 psi | ASTM D790 |
| Flexural Modulus | 18.0 GPa | 2610 ksi | ASTM D790 |
| Izod Impact, Notched | 18.7 J/cm | 35.0 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 3.00e+14 ohm-cm | 3.00e+14 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.3 @Frequency 100 Hz | 4.3 @Frequency 100 Hz | ASTM D150 |
| Dielectric Strength | 16.0 kV/mm | 406 kV/in | ASTM D149 |
| Dissipation Factor | 0.0070 @Frequency 100 Hz | 0.0070 @Frequency 100 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | >= 300 °C | >= 572 °F | Deflection Temp; Load not reported; ASTM D648 |
| Shrinkage | 0.0010 % | 0.0010 % | |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 121 - 163 °C | 250 - 325 °F | Mold temperature |