- 密度 [g/cm3]: 1.35
- 缺口沖擊強度: 15.0
- 拉伸強度 [MPa]: 50.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.35 g/cc | 0.0488 lb/in3 | ISO R 1183 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 170 MPa | 24700 psi | Hc 30; ISO 2039; partially | ||
| Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO-DIS 527 | ||
| Tensile Modulus | 7.00 GPa | 1020 ksi | DIN 53457 | ||
| Flexural Strength | 80.0 - 100 MPa | 11600 - 14500 psi | DIN 54352 | ||
| Compressive Strength | 170 MPa | 24700 psi | ISO 604 | ||
| Izod Impact, Notched (ISO) | 15.0 kJ/m2 | 7.14 ft-lb/in2 | DIN 53453 | ||
| Izod Impact Resistance | 1.80 J/cm2 | 8.57 ft-lb/in2 | swinging hammer 0,1 DIN 51222; DIN 53453 | ||
| Coefficient of Friction | 0.020 | 0.020 | With lubrication | ||
| Coefficient of Friction, Dynamic | 0.020 | 0.020 | no lube; Steel 2162, Rvst=2E-6m, p=0.05 Mpa, v=0.6 m/s, t=40°C | ||
| Electrical Properties | Metric | English | Comments | ||
| Surface Resistance | 1.00e+8 ohm | 1.00e+8 ohm | DIN 53482 | ||
| Dielectric Constant | 5.0 | 5.0 | DIN 53483 | ||
| Dielectric Loss Index | 0.30 | 0.30 | DIN 53483 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 30.0 μm/m-°C @Temperature 20.0 - 100 °C | 16.7 μin/in-°F @Temperature 68.0 - 212 °F | DIN 53752 | ||
| Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft2-°F | DIN 52612 | ||
| Maximum Service Temperature, Air | 120 °C | 248 °F | Continuous | ||
| 150 °C | 302 °F | Intermittent | |||
| Descriptive Properties | |||||
| Creepage/leakage Resistance | KA1 | DIN 53480 | |||
| Moisture Absorption at Equilibrium | 100 mg | DIN 53472 | |||