- 密度 [g/cm3]: 1.48
- 吸水率 [%]: 0.29
- 缺口沖擊強度: 0.174
- 彎曲強度 [MPa]: 54.0
- 彎曲模量 [MPa]: 9.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.680 g/cc | 0.0246 lb/in3 | ASTM D1895 |
| Density | 1.48 g/cc | 0.0535 lb/in3 | ASTM D792 |
| Water Absorption | 0.29 % | 0.29 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0033 cm/cm | 0.0033 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 83 | 83 | ASTM D785 |
| Tensile Strength, Ultimate | 54.0 MPa | 7830 psi | ASTM D638 |
| Elongation at Break | 0.58 % | 0.58 % | ASTM D638 |
| Tensile Modulus | 8.80 GPa | 1280 ksi | ASTM D638 |
| Flexural Strength | 78.0 MPa | 11300 psi | ASTM D790 |
| Flexural Modulus | 9.20 GPa | 1330 ksi | ASTM D790 |
| Compressive Strength | 186 MPa | 27000 psi | ASTM D695 |
| Izod Impact, Notched | 0.174 J/cm | 0.326 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.199 J/cm2 | 0.947 ft-lb/in2 | ASTM D256 |
| Impact | 85 | 85 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 6.90e+12 ohm-cm | 6.90e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.7 | 4.7 | ASTM D150 |
| Dielectric Strength | 15.0 kV/mm | 381 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.037 | 0.037 | ASTM D150 |
| Arc Resistance | 166 sec | 166 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 82.0 μm/m-°C @Temperature 40.0 - 130 °C | 45.6 μin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Thermal Conductivity | 0.500 W/m-K @Temperature 100 °C | 3.47 BTU-in/hr-ft2-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 203 °C | 397 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 186 °C | 367 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.50 mm | V-1 @Thickness 0.0591 in | |
| Oxygen Index | 27 % | 27 % | ASTM D2863 |
| Shrinkage | 0.167 % | 0.167 % | 72 hr, 120oC; ASTM D1299 |