- 吸水率 [%]: 0.05
- 缺口沖擊強(qiáng)度: 0.299
- 彎曲強(qiáng)度 [MPa]: 83.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.76 g/cc | 1.76 g/cc | ASTM D792 |
| Bulk Density | 0.800 g/cc | 0.0289 lb/in3 | ASTM D1895 |
| Bulk Factor | 2.3 | 2.3 | ASTM D1895 |
| Water Absorption | 0.050 % | 0.050 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | ASTM D6289 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 83.0 MPa | 12000 psi | ASTM D638 |
| Tensile Modulus | 13.8 GPa | 2000 ksi | ASTM D638 |
| Flexural Strength | 138 MPa | 20000 psi | ASTM D790 |
| Compressive Strength | 220 MPa | 31900 psi | ASTM D695 |
| Izod Impact, Notched | 0.299 J/cm | 0.560 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.3 @Frequency 1e+6 Hz | 4.3 @Frequency 1e+6 Hz | ASTM D150 |
| 4.7 @Frequency 1000 Hz | 4.7 @Frequency 1000 Hz | ASTM D150 | |
| 5.1 @Frequency 60 Hz | 5.1 @Frequency 60 Hz | ASTM D150 | |
| Dielectric Strength | 15.7 kV/mm | 400 kV/in | Step by Step; ASTM D149 |
| 17.7 kV/mm | 450 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.010 @Frequency 1e+6 Hz | 0.010 @Frequency 1e+6 Hz | ASTM D150 |
| 0.030 @Frequency 1000 Hz | 0.030 @Frequency 1000 Hz | ASTM D150 | |
| 0.050 @Frequency 60 Hz | 0.050 @Frequency 60 Hz | ASTM D150 | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 22.0 μm/m-°C @Temperature 23.0 - 60.0 °C | 12.2 μin/in-°F @Temperature 73.4 - 140 °F | |
| Maximum Service Temperature, Air | 150 °C @Thickness 3.00 mm | 302 °F @Thickness 0.118 in | UL Temperature Index |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| V-0 @Thickness 3.00 mm | V-0 @Thickness 0.118 in | ||