- 密度 [g/cm3]: 2.6
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 2.60 g/cc | 0.0939 lb/in3 | Silicone Property; Arlon SQA-TMS-024 | ||
| Thickness | 203 microns | 8.00 mil | Product; Arlon SQA-TMS-003 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 57 | 57 | Silicone Property; ASTM D2240 | ||
| Tensile Strength | 2.28 MPa | 330 psi | Silicone Property; ASTM D412 | ||
| Elongation at Break | 170 % | 170 % | Silicone Property; ASTM D412 | ||
| Modulus of Elasticity | 0.00159 GPa | 0.230 ksi | Silicone Property; Arlon SQA-TMS-008 | ||
| Poissons Ratio | 0.50 | 0.50 | |||
| Shear Modulus | <= 0.000345 GPa | <= 0.0500 ksi | Product Property; ASTM D1002 | ||
| Shear Strength | 2.07 MPa | 300 psi | Lap; Product Property; ASTM D1002 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 5.9 @Frequency 1.00e+6 Hz | 5.9 @Frequency 1.00e+6 Hz | Silicone Property; IPC TM 650 - 2.5.5.3 | ||
| Dielectric Strength | 41.3 kV/mm | 1050 kV/in | ASTM D149 | ||
| Dissipation Factor | 0.0040 @Frequency 1.00e+6 Hz | 0.0040 @Frequency 1.00e+6 Hz | Silicone Property; IPC TM 650 - 2.5.5.3 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 128 μm/m-°C | 71.1 μin/in-°F | Silicone Property; ASTM E831 | ||
| Specific Heat Capacity | 0.900 J/g-°C | 0.215 BTU/lb-°F | Silicone Property; ASTM E1461-01 | ||
| Thermal Conductivity | 1.70 W/m-K @Temperature 100 °C | 11.8 BTU-in/hr-ft2-°F @Temperature 212 °F | Silicone Property; ASTM E1530 | ||
| Maximum Service Temperature, Inert | 204 °C | 399 °F | |||
| Minimum Service Temperature, Air | -100 °C | -148 °F | |||
| Glass Transition Temp, Tg | -120 °C | -184 °F | Silicone Property; ASTM D3418 | ||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 15.0 min @Temperature 100 °C | 0.250 hour @Temperature 212 °F | Recommended Cure Cycle; After Thermabond? reaches temperature | ||
| Shelf Life | 6.00 Month @Temperature 7.22 °C | 6.00 Month @Temperature 45.0 °F | |||
| Descriptive Properties | |||||
| Color | Gray | ||||
| Plasticity (mm) | 2.2 | Arlon SQA-TMS-005 | |||
| Thermal Resistance (°C-in2/W) | 0.112 | ASTM E1530 | |||
| Total Product Weight (oz/yd2) | 15.5 | Arlon SQA-TMS-025 | |||