- 密度 [g/cm3]: 1.32
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.32 g/cc | 0.0477 lb/in3 | Side 1 Uncured Silicone Property; Arlon SQA-TMS-024 | ||
| 1.32 g/cc | 0.0477 lb/in3 | Side 2 Silicone Property; Arlon SQA-TMS-024 | |||
| 1.56 g/cc | 0.0564 lb/in3 | Side 1 Cured Silicone Property; Arlon SQA-TMS-024 | |||
| Thickness | 25.4 microns | 1.00 mil | Side 1 Layer 1; Arlon SQA-TMS-003 | ||
| 76.2 microns | 3.00 mil | Side 1 Layer 2; Arlon SQA-TMS-003 | |||
| 76.2 microns | 3.00 mil | Side 2; Arlon SQA-TMS-003 | |||
| 203 microns | 8.00 mil | Substrate; Arlon SQA-TMS-003 | |||
| 381 microns | 15.0 mil | Overall Thickness; Arlon SQA-TMS-003 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 37 | 37 | Side 1 Uncured Silicone Property; ASTM D2240 | ||
| 37 | 37 | Side 2 Silicone Property; ASTM D2240 | |||
| 50 | 50 | Side 1 Cured Silicone Property; ASTM D2240 | |||
| Tensile Strength | 2.90 MPa | 420 psi | Side 1 Cured Silicone Property; ASTM D412 | ||
| 6.55 MPa | 950 psi | Side 1 Uncured Silicone Property; ASTM D412 | |||
| 6.55 MPa | 950 psi | Side 2 Silicone Property; ASTM D412 | |||
| Elongation at Break | 500 % | 500 % | Side 1 Cured Silicone Property; ASTM D412 | ||
| 670 % | 670 % | Side 1 Uncured Silicone Property; ASTM D412 | |||
| 670 % | 670 % | Side 2 Silicone Property; ASTM D412 | |||
| Tear Strength | 9.64 kN/m | 55.0 pli | Side 1 Cured Silicone Property; ASTM D624 | ||
| 26.3 kN/m | 150 pli | Side 1 Uncured Silicone Property; ASTM D624 | |||
| 26.3 kN/m | 150 pli | Side 2 Silicone Property; ASTM D624 | |||
| Peel Strength | 1.23 kN/m | 7.00 pli | Bond Strength; Arlon SQA-TMS-011 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Inert | 232 °C | 450 °F | |||
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 120 min @Temperature 204 °C | 2.00 hour @Temperature 400 °F | Recommended Post Cure Cycle | ||
| 15.0 min @Pressure 0.345 MPa, Temperature 121 °C | 0.250 hour @Pressure 50.0 psi, Temperature 250 °F | Recommended Cure Cycle | |||
| Shelf Life | 6.00 Month @Temperature 21.1 °C | 6.00 Month @Temperature 70.0 °F | |||
| Descriptive Properties | |||||
| Color | Red | ||||
| Total Product Weight (oz/yd2) | 16.9 | Arlon SQA-TMS-025 | |||