日韩亚洲中文图片小说,中文字幕不卡在线播放,国产精品久久人人做人人爽,国产精品久久久久孕妇,国产精品久久一区二区三区

Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C

Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C 物性表: Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C物性表及特性介紹,Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C注塑參數詳情,如需Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C下載, 可到相關下載區下載

密度 [g/cm3]: 1.7

Physical Properties	Metric	English	Comments

Density	1.70 g/cc	0.0614 lb/in3	Silicone Property; Arlon SQA-TMS-024
Thickness	25.4 microns	1.00 mil	Liner
	76.2 microns	3.00 mil	Carrier
	381 microns	15.0 mil	Overall; Arlon SQA-TMS-003
Outgassing - Total Mass Loss	0.50 %	0.50 %	Arlon SQA-TMS-045

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	85	85	Silicone Property; ASTM D2240
Tensile Strength	2.07 MPa	300 psi	Silicone Property; ASTM D412
Elongation at Break	28 %	28 %	Silicone Property; ASTM D412
Modulus of Elasticity	0.0328 GPa	4.75 ksi	ASTM E 831
Poissons Ratio	0.50	0.50	Approximately, Silicone Property
Shear Modulus	0.000448 GPa	0.0650 ksi	ASTM D 1002
Shear Strength	1.28 MPa	185 psi	Lap Shear Strength; ASTM D1002

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.8	3.8	D_k, Silicone Property; IPC TM 650-2.5.5.3
Dielectric Strength	31.5 kV/mm	800 kV/in	ASTM D149
Dissipation Factor	0.0028	0.0028	D_f, Silicone Property; IPC TM 650-2.5.5.3

Thermal Properties	Metric	English	Comments
CTE, linear	39.0 μm/m-°C	21.7 μin/in-°F	Silicone Property; ASTM E 831
Specific Heat Capacity	0.700 J/g-°C	0.167 BTU/lb-°F	E 1461-01
Thermal Conductivity	1.50 W/m-K	10.4 BTU-in/hr-ft2-°F	Silicone Property; ASTM E 1530
Maximum Service Temperature, Air	204 °C	400 °F
Minimum Service Temperature, Air	-73.3 °C	-100 °F
Glass Transition Temp, Tg	-110 - -95.0 °C	-166 - -139 °F	Silicone Property; ASTM D3418

Processing Properties	Metric	English	Comments
Cure Time	15.0 min @Temperature 121 °C	0.250 hour @Temperature 250 °F	Recommended Cure Cycle
Shelf Life	6.00 Month @Temperature 4.44 - 10.0 °C	6.00 Month @Temperature 40.0 - 50.0 °F	From date of manufacture

Descriptive Properties
Color	White
Total Product Weight (g/m²)	655		Arlon SQA-TMS-025

關鍵詞:
供應
硅膠
Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-34296.html

免責聲明: 本文 Arlon Thermabond? R36300W015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass C 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡