- 密度 [g/cm3]: 1.28
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.28 g/cc | 0.0462 lb/in3 | Silicone Property; Arlon SQA-TMS-024 | ||
| Thickness | 50.8 microns | 2.00 mil | Overall; Arlon SQA-TMS-003 | ||
| 102 microns | 4.00 mil | Substrate; Arlon SQA-TMS-003 | |||
| 406 microns | 16.0 mil | Side 1; Arlon SQA-TMS-003 | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 60 | 60 | Silicone Property; ASTM D2240 | ||
| Tensile Strength | 7.86 MPa | 1140 psi | Silicone Property; ASTM D412 | ||
| Elongation at Break | 340 % | 340 % | Silicone Property; ASTM D412 | ||
| Tear Strength | 17.0 kN/m | 97.0 pli | Die B, Silicone Property; ASTM D624 | ||
| Peel Strength | 1.58 kN/m | 9.00 pli | Bond Strength (S1 to S1); Arlon SQA-TMS-011 | ||
| 2.12 kN/m | 12.1 pli | Bond Strength (S1 to S2); Arlon SQA-TMS-011 | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 232 °C | 450 °F | |||
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 120 min @Temperature 204 °C | 2.00 hour @Temperature 400 °F | Recommended Postcure Cycle | ||
| 15.0 min @Pressure 0.345 MPa, Temperature 121 °C | 0.250 hour @Pressure 50.0 psi, Temperature 250 °F | Recommended Cure Cycle | |||
| Shelf Life | 3.00 Month @Temperature 7.22 °C | 3.00 Month @Temperature 45.0 °F | From date of manufacture | ||
| Descriptive Properties | |||||
| Color | Red | ||||
| Red | Substrate | ||||
| Total Product Weight (oz/yd2) | 20.3 | Arlon SQA-TMS-025 | |||


