- 密度 [g/cm3]: 1.71
- 吸水率 [%]: 0.28
- 缺口沖擊強度: 0.215
- 彎曲強度 [MPa]: 53.0
- 彎曲模量 [MPa]: 11.1
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.610 g/cc | 0.0220 lb/in3 | ASTM D1895 |
| Density | 1.71 g/cc | 0.0618 lb/in3 | ASTM D792 |
| Water Absorption | 0.28 % | 0.28 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0049 cm/cm | 0.0049 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 73 | 73 | ASTM D785 |
| Tensile Strength, Ultimate | 53.0 MPa | 7690 psi | ASTM D638 |
| Elongation at Break | 0.47 % | 0.47 % | ASTM D638 |
| Tensile Modulus | 12.7 GPa | 1840 ksi | ASTM D638 |
| Flexural Strength | 90.0 MPa | 13100 psi | ASTM D790 |
| Flexural Modulus | 11.1 GPa | 1610 ksi | ASTM D790 |
| Compressive Strength | 155 MPa | 22500 psi | ASTM D695 |
| Izod Impact, Notched | 0.215 J/cm | 0.403 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.239 J/cm2 | 1.14 ft-lb/in2 | ASTM D256 |
| Impact | 125 | 125 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.30e+12 ohm-cm | 1.30e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 6.8 | 6.8 | ASTM D150 |
| Dielectric Strength | 6.80 kV/mm | 173 kV/in | Step by Step; ASTM D149 |
| 9.50 kV/mm | 241 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.069 | 0.069 | ASTM D150 |
| Arc Resistance | 188 sec | 188 sec | ASTM D495 |
| Comparative Tracking Index | 600 V | 600 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 165 °C | 329 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 187 °C | 369 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.00 mm | V-0 @Thickness 0.0394 in | |
| Shrinkage | 0.36 % | 0.36 % | 240 hr, 105oC; ASTM D1299 |