- 缺口沖擊強度: 0.534
- 拉伸強度 [MPa]: 117.0
- 彎曲模量 [MPa]: 27.6
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.51 g/cc | 1.51 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.00010 cm/cm | 0.00010 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 117 MPa | 17000 psi | ASTM D638 |
| Elongation at Break | 0.50 % | 0.50 % | ASTM D638 |
| Tensile Modulus | 34.5 GPa | 5000 ksi | ASTM D638 |
| Flexural Strength | 172 MPa | 25000 psi | ASTM D790 |
| Flexural Modulus | 27.6 GPa | 4000 ksi | ASTM D790 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | <= 100000 ohm-cm | <= 100000 ohm-cm | ASTM D257 |
| Surface Resistivity per Square | <= 1.00e+7 ohm | <= 1.00e+7 ohm | ASTM D257 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 316 - 343 °C | 600 - 650 °F | |
| Mold Temperature | 135 - 149 °C | 275 - 300 °F | |
| Drying Temperature | 135 - 149 °C | 275 - 300 °F | |