亚洲丰满熟女一区二区v,亚洲女人天堂,夜夜添无码试看一区二区三区,亚洲精品揄拍自拍首页一,成人特黄特色毛片免费看

Bergaflex? BFI 90A-318|TPS|PolyOne

Bergaflex? BFI 90A-318|TPS|PolyOne 物性表: Bergaflex? BFI 90A-318|TPS|PolyOne物性表及特性介紹,Bergaflex? BFI 90A-318|TPS|PolyOne注塑參數詳情,如需Bergaflex? BFI 90A-318|TPS|PolyOne下載, 可到相關下載區下載

Product TextsBergaflex 90A-318, TPE-S, SEBS9	MPa	ISO 527-1/-2
Stress at 300% elongation	8.4	MPa	ISO 527-1/-2
破壞時應變(Strain at break) TPE	>300	%	ISO 527-1/-2
破壞時應變(Stress at break) TPE	19.1	MPa	ISO 527-1/-2
壓縮設置下的恒應變(Compression Set under constant strain) (23°C)	23	%	ISO 815
壓縮設置下的恒應變(Compression Set under constant strain) (70°C)	82	%	ISO 815
邵爾A硬度(Shore A hardness) (3s)	90	-	ISO 868

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density)	890	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	170	°C	ISO 294
Injection Molding, mold temperature	30	°C	ISO 10724

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Other Extrusion, Blow Molding, CalanderingDelivery formPelletsSpecial CharacteristicsU.V. stabilized or stable to weatherRegional AvailabilityEuropeDisclaimerCopyright M-Base .
[/td][/tr][/table]

關鍵詞:
TPS
PolyOne
Bergaflex? BFI 90A-318

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-99410.html

免責聲明: 本文 Bergaflex? BFI 90A-318|TPS|PolyOne 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡