免费午夜无码片在线观看影院,人妻夜夜爽天天爽三区丁香花,狠狠色婷婷久久综合频道日韩 ,伊人狠狠色j香婷婷综合,波多野结衣在线精品视频

XANTAR? G2F 23 UR|PC-GF10 FR|Mitsubishi EP

Product Texts10% Glass Reinforced, Flame Retardant, UV Stabilized2	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.2	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.6	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3500	MPa	ISO 527-1/-2
屈服應力(Yield stress)	65	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	15	%	ISO 527-1/-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	145	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	45	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). 5V at thickness h	5VA	class	IEC 60695-11-20
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-20
UL 識別(recognition)	UL	-	-
Oxygen index	35	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.1	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	9	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	90	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	29	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	200	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.31	%	Sim. to ISO 62
密度(Density)	1270	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1090	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.26	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1620	J/(kg K)	-
Eff. thermal diffusivity	1.48E-7	m2/s	-
噴射溫度(Ejection temperature)	134	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	100	°C	ISO 10724

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, EuropeOther text informationInjection moldingInjection Molding RecommendationsChemical Media Resistance

Acids

關鍵詞:
Mitsubishi EP
PC-GF10 FR
XANTAR? G2F 23 UR

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-99173.html

免責聲明: 本文 XANTAR? G2F 23 UR|PC-GF10 FR|Mitsubishi EP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡