日韩精品av一区二区三区,jizz国产免费观看,国产成人高清亚洲综合,欧美日本中文,中文字幕在线看视频一区二区三区

Product TextsMVR (300 °C/1.2 kg) 19 cm3/10 minimproved impact strengthlow viscosityUVstabilizedeasy releaseavailable in light colors only

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	19	cm3/10min	ISO 1133
溫度(Temperature)	300	°C	ISO 1133
負載(Load)	1.2	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.7	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.7	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2400	MPa	ISO 527-1/-2
屈服應力(Yield stress)	62	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5.8	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
Puncture - maximum force (+23°C)	4900	N	ISO 6603-2
Puncture - maximum force (-30°C)	5800	N	ISO 6603-2
Puncture energy (+23°C)	50	J	ISO 6603-2
Puncture energy (-30°C)	55	J	ISO 6603-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	123	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	136	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	143	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	65	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
Oxygen index	30	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.1	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	10	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	110	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	34	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	250	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.3	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.12	%	Sim. to ISO 62
密度(Density)	1200	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsLight stabilized or stable to light, U.V. stabilized or stable to weather, TransparentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.02 % .

Makrolon? 2407 MAS056|PC|Bayer MatSc