国产成人无码一区二区三区,一本大道无码av天堂,亚洲国产精品无码久久电影,久久精品中文字幕少妇,五月婷婷激情视频俺也去淫

Product TextsMVR (300 °C/1.2 kg) 6.0 cm3/10 minExtrusionflame retardantUL 94V-2/1.5 mmand 3.0 mmhigh viscosityUV stabilizedoptimized for low plate-outavailable in transparent, translucent and opaque colors; solid sheet

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	6	cm3/10min	ISO 1133
溫度(Temperature)	300	°C	ISO 1133
負載(Load)	1.2	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.7	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.8	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2400	MPa	ISO 527-1/-2
屈服應力(Yield stress)	65	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6.2	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
Tensile creep modulus (1h)	2200	MPa	ISO 899-1
Tensile creep modulus (1000h)	1900	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
Puncture - maximum force (+23°C)	5600	N	ISO 6603-2
Puncture - maximum force (-30°C)	6500	N	ISO 6603-2
Puncture energy (+23°C)	60	J	ISO 6603-2
Puncture energy (-30°C)	70	J	ISO 6603-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	148	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	127	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	140	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	147	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	65	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	6.0	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	31	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.1	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	8	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	95	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	34	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	225	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.3	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.12	%	Sim. to ISO 62
密度(Density)	1200	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Luminous transmittance	89	%	ISO 13468-1, -2

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	300	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

CharacteristicsProcessingProfile Extrusion, Sheet Extrusion, Other ExtrusionDelivery formPelletsSpecial CharacteristicsLight stabilized or stable to light, U.V. stabilized or stable to weather, TransparentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .

Makrolon? 1804|PC|Bayer MatSc