中文字幕在线永久免费视频,国产成人一区二区视频免费,精品成人免费自拍视频,精品中文人妻在线不卡,强奷乱码中文字幕

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	22	g/10min	ASTM D 1238
溫度(Temperature)	300	°C	-
負載(Load)	1.2	kg	-
模具收縮(Mold Shrinkage) (MD)	0.006	mm/mm	ASTM D 955
密度(Density) (73°F)	1200	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	21	cm3/10min	ISO 1133
溫度(Temperature)	300	°C	ISO 1133
負載(Load)	1.2	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2350	MPa	ISO 527-1/-2
屈服應力(Yield stress)	63	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6	%	ISO 527-1/-2
破壞時應變(Stress at break)	65	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	65	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	12	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2300	MPa	ISO 178
懸臂梁式沖擊切口 (23°C)	65	kJ/m2	ISO 180/1A
懸臂梁式沖擊切口	11	kJ/m2	ISO 180/1A
溫度(Temperature)	-30	°C	ISO 180/1A
懸臂梁式沖擊無切口(Izod Impact unnotched) (23°C)	N	kJ/m2	ISO 180/1U
球壓痕硬度(Ball indentation hardness)	95	MPa	ISO 2039-1
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	2400	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	63	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Break	70	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	7	%	ASTM D 638
斷裂伸長率(Elongation at Break)	125	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2350	MPa	ASTM D 790
懸臂梁式沖擊切口 (1/8 in)	0.0673	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.0288	kJ/m	ASTM D 256
溫度(Temperature)	-30	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	122	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	133	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	140	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	70	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
燃燒性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-10
Oxygen index	25	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	68	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	68	E-6/K	ASTM D 696
DTUL @ 264 psi	129	°C	ASTM D 648
Vicat 溫度(Temperature)	139	°C	ASTM D 1525

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	2.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	100	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	17	kV/mm	IEC 60243-1

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.35	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.15	%	Sim. to ISO 62
密度(Density)	1200	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體熱導率(Thermal conductivity of melt)	0.2	W/(m K)	-

Optical properties	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
Haze	0.8	%	ASTM D 1003
Light Transmittance	88	%	ASTM D 1003

CharacteristicsProcessingInjection MoldingAdditivesRelease agentEcological valuationUS Pharmacopeia Class VI ApprovedApplicationsMedicalRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .

Lexan HP2REU|PC|沙特基礎