鲁丝一区鲁丝二区鲁丝三区,国产精品色内内在线播放,亚洲欧美成人aⅴ在线,亚洲精品第一区二区三区,4hu四虎永久在线观看

Cycoloy CX7259|PC...|沙特基礎

Cycoloy CX7259|PC...|沙特基礎 物性表: Cycoloy CX7259|PC...|沙特基礎物性表及特性介紹,Cycoloy CX7259|PC...|沙特基礎注塑參數詳情,如需Cycoloy CX7259|PC...|沙特基礎下載, 可到相關下載區下載

.. |SABIC_IP

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	23	g/10min	ASTM D 1238
溫度(Temperature)	260	°C	-
負載(Load)	2.16	kg	-
模具收縮(Mold Shrinkage) (MD)	0.006	mm/mm	ASTM D 955
密度(Density) (73°F)	1200	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	28	cm3/10min	ISO 1133
溫度(Temperature)	300	°C	ISO 1133
負載(Load)	1.2	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2600	MPa	ISO 527-1/-2
屈服應力(Yield stress)	64	MPa	ISO 527-1/-2
屈服應變(Yield strain)	3.8	%	ISO 527-1/-2
破壞時應變(Stress at break)	49	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	10	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	9	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2670	MPa	ISO 178
懸臂梁式?jīng)_擊切口 (23°C)	10	kJ/m2	ISO 180/1A
懸臂梁式?jīng)_擊切口	9	kJ/m2	ISO 180/1A
溫度(Temperature)	-30	°C	ISO 180/1A
懸臂梁式?jīng)_擊無切口(Izod Impact unnotched) (23°C)	N	kJ/m2	ISO 180/1U
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	2630	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	59	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Break	53	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	3.8	%	ASTM D 638
斷裂伸長率(Elongation at Break)	80	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2620	MPa	ASTM D 790
抗彎強度(Flexural Strength)	96	MPa	ASTM D 790
懸臂梁式?jīng)_擊切口 (1/8 in)	0.122	kJ/m	ASTM D 256
懸臂梁式?jīng)_擊切口 (Low-溫度(Temperature))	0.0663	kJ/m	ASTM D 256
溫度(Temperature)	-30	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	85	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	101	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	69	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	72	E-6/K	ISO 11359-1/-2
燃燒性厚度(Burning behav. at thickness h)	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.6	mm	IEC 60695-11-10
ASTM數據(ASTM Data)
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	70	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	73	E-6/K	ASTM D 696
DTUL @ 264 psi	93	°C	ASTM D 648
Vicat 溫度(Temperature)	101	°C	ASTM D 1525

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.17	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.1	%	Sim. to ISO 62
密度(Density)	1200	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsFlame retardant, High impact or impact modified, Heat stabilized or stable to heatRegional Availability .

關鍵詞:
SABIC_IP
Cycoloy CX7259
PC...

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-96912.html

免責聲明: 本文 Cycoloy CX7259|PC...|沙特基礎 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡