正在播放国产对白孕妇作爱,AV人摸人人人澡人人超碰,亚洲国产成人无码影院,99热这里只有成人精品国产,国产综合色精品一区二区三区

Product TextsMVR (330°C/2.16kg) 18 cm3/10 mineasy releaseUV stabilizedVicat softening temperature (VST/B 120)=182°CLamp coversHeadlamp lenses

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	18	cm3/10min	ISO 1133
溫度(Temperature)	330	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2450	MPa	ISO 527-1/-2
屈服應力(Yield stress)	74	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6.6	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
Puncture - maximum force (+23°C)	5000	N	ISO 6603-2
Puncture - maximum force (-30°C)	5800	N	ISO 6603-2
Puncture energy (+23°C)	50	J	ISO 6603-2
Puncture energy (-30°C)	52	J	ISO 6603-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	157	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	172	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	65	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	65	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-10
Oxygen index	26	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	2.9	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	2.8	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	10	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	90	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	250	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.3	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.12	%	Sim. to ISO 62
密度(Density)	1150	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	980	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.206	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2100	J/(kg K)	-
Eff. thermal diffusivity	1E-7	m2/s	-
噴射溫度(Ejection temperature)	163	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	330	°C	ISO 294
Injection Molding, mold temperature	100	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

DiagramsV. stabilized or stable to weatherRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.02 %DisclaimerCopyright M-Base .

Apec? 1897|PC|Bayer MatSc