欧洲码亚洲码的区别入口,久久国产精品夜色,亚洲AV无码一二区三区在线播放,免费乱理伦片在线观看,2020国产欧洲精品网站

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	10	cm3/10min	ISO 1133
溫度(Temperature)	280	°C	ISO 1133
負載(Load)	5	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.2	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.7	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	12000	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	110	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	1.8	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	30	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	30	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	7	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	6	kJ/m2	ISO 179/1eA
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	11600	MPa	ASTM D 638
抗拉強度(Tensile Strength)	117	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	1.9	%	ASTM D 638
抗壓強度(Compressive Strength)	175	MPa	ASTM D 695
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	11700	MPa	ASTM D 790
抗彎強度(Flexural Strength)	198	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 115	-	ASTM D 785
懸臂梁式沖擊切口 (1/8 in)	0.075	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.069	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256
懸臂梁式沖擊無切口(Izod Impact unnotched) (1/8 in)	0.53	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	250	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	220	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	240	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	22	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	60	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	0.75	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	24	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	60	E-6/K	ASTM D 696
DTUL @ 66 psi	241	°C	ASTM D 648
DTUL @ 264 psi	211	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	250	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.8	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	70	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	150	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	23	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.015	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.7	-	ASTM D 150
表面電阻率(Surface Resistivity)	1E14	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E15	Ohm*cm	ASTM D 257

材料特殊性能(Material specific properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	50	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1450	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.28	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1510	J/(kg K)	-
噴射溫度(Ejection temperature)	165	°C	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

Rynite? 940 BK505|PET-(GF+MD)40|DuPont