日本亚洲色大成网站www久久,日韩有码中文字幕国产,伊人成人在线视频免费,最新午夜男女福利片视频,精品亚洲成A人在线观看青青

嫻佸彉鎬ц兘(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎴愬瀷鏀剁緝(Molding shrinkage) (parallel)	1.8 / *	%	ISO 294-4, 2577
鎴愬瀷鏀剁緝(Molding shrinkage) (normal)	1.8 / *	%	ISO 294-4, 2577

鏈烘鎬ц兘(鏈烘鎬ц兘(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鎷変幾妯￠噺(Tensile Modulus)	900 / 400	MPa	ISO 527-1/-2
灞堟湇搴斿姏(Yield stress)	31 / -	MPa	ISO 527-1/-2
灞堟湇搴斿彉(Yield strain)	25 / -	%	ISO 527-1/-2
鏂鎷変幾搴斿彉(Nominal strain at break)	>50 / -	%	ISO 527-1/-2
綆€鏀鍐插嚮寮哄害(Charpy impact strength) (+23擄C)	N / N	kJ/m虜	ISO 179/1eU
綆€鏀鍐插嚮寮哄害(Charpy impact strength) (-30擄C)	N / N	kJ/m虜	ISO 179/1eU
綆€鏀緙哄彛鍐插嚮寮哄害(Charpy notched impact strength) (+23擄C)	70 / 130	kJ/m虜	ISO 179/1eA
綆€鏀緙哄彛鍐插嚮寮哄害(Charpy notched impact strength) (-30擄C)	14 / 13	kJ/m虜	ISO 179/1eA
Puncture energy (+23擄C)	16 / -	J	ISO 6603-2
Puncture energy (-30擄C)	25 / -	J	ISO 6603-2
ASTM鏁版嵁(ASTM Data)
鎶楁媺寮哄害(Tensile Strength)	48	MPa	ASTM D 638
鏂浼擱暱鐜?Elongation at Break)	225	%	ASTM D 638
寮洸寮規€фā閲?寮洸寮規€фā閲?Flexural Modulus))	524	MPa	ASTM D 790
Shore D Hardness	70	-	ASTM D 2240
鎮噦姊佸紡鍐插嚮鍒囧彛 (1/8 in)	N	kJ/m	ASTM D 256
鎮噦姊佸紡鍐插嚮鍒囧彛 (Low-娓╁害(Temperature))	0.693	kJ/m	ASTM D 256
娓╁害(Temperature)	-40	擄C	ASTM D 256

鐑€ц兘(鐑€ц兘(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鐔斿寲娓╁害(鐔斿寲娓╁害(Melting temperature)) (10擄C/min)	218 / *	擄C	ISO 11357-1/-3
娓╁害璐熻嵎鍙樺艦(Temp. of deflection under load) (1.80 MPa)	47 / *	擄C	ISO 75-1/-2
娓╁害璐熻嵎鍙樺艦(Temp. of deflection under load) (0.45 MPa)	170 / *	擄C	ISO 75-1/-2
Vicat softening temperature (50擄C/h 50N)	95 / *	擄C	ISO 306
COEFF綰挎€х儹(Coeff. of linear therm. expansion) (parallel)	200 / *	E-6/K	ISO 11359-1/-2
COEFF綰挎€х儹(Coeff. of linear therm. expansion) (normal)	180 / *	E-6/K	ISO 11359-1/-2
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
鍘氬害嫻嬭瘯(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
UL 璇嗗埆(recognition)	UL / *	-	-
鐕冪儳鎬?鐞冨帇鐥曠‖搴?Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
鍘氬害嫻嬭瘯(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 璇嗗埆(recognition)	UL / *	-	-
ASTM鏁版嵁(ASTM Data)
UL 94 闃葷噧絳夌駭(Flame rating)	HB	-	UL 94
鍘氬害嫻嬭瘯(Thickness tested)	1.5	mm	-
鐑啫鑳€緋繪暟(Coefficient of Thermal Expansion) (MD)	200	E-6/K	ASTM D 696
鐑啫鑳€緋繪暟(Coefficient of Thermal Expansion) (TD)	180	E-6/K	ASTM D 696
DTUL @ 66 psi	170	擄C	ASTM D 648
DTUL @ 264 psi	52	擄C	ASTM D 648
鐔斿寲娓╁害(Melting 娓╁害(Temperature))	216	擄C	ASTM D 3418

鐢墊皵鎬ц兘(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (100Hz)	80 / 550	E-4	IEC 60250
鑰楁暎鍥犳暟(鑰楁暎鍥犳暟(Dissipation factor)) (1MHz)	140 / 1800	E-4	IEC 60250
浣撶Н鐢甸樆鐜?Volume resistivity)	1E13 / 1E11	Ohm*m	IEC 60093
琛ㄩ潰鐢甸樆鐜?Surface resistivity)	* / 1E15	Ohm	IEC 60093
鐢墊皵寮哄害(Electric strength)	31 / -	kV/mm	IEC 60243-1
鐩告瘮婕忕數璧風棔鎸囨暟(Comparative tracking index)	600 / -	-	IEC 60112

鍏朵粬灞炴€?Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
鍚告按鐜?Water absorption)	6.8 / *	%	Sim. to ISO 62
鍚告箍鎬?Humidity absorption)	2.3 / *	%	Sim. to ISO 62
瀵嗗害(Density)	1040 / -	kg/m魯	ISO 1183

Film Properties	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
Strain at yield (parallel)	4 / *	%	ISO 527-3

鏉愭枡鐗規畩鎬ц兘(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
綺樻暟(Viscosity number)	200 / *	cm魯/g	ISO 307, 1157, 1628

嫻佸彉璁＄畻灞炴€?Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO鏁版嵁(ISO鏁版嵁(CAMPUS/ISO) Data)
瀵嗗害(Density) of melt	880	kg/m魯	-
鐔斾綋鐑鐜?Thermal conductivity of melt)	0.15	W/(m K)	-
瑙勬牸鐨勭儹瀹硅瀺鍖?Spec. heat capacity of melt)	2600	J/(kg K)	-
鍠峰皠娓╁害(Ejection temperature)	145	擄C	-

Diagrams ISO 1817 Liquid C) (23擄C)

ISO 1817 Liquid 4) (23擄C)

ISO 1817 Liquid F) (23擄C)

ISO 1817 Liquid F) (90擄C)

ISO 1817 Liquid F) (>90擄C)

Salt solutions

4 Brake fluid (130擄C)

Zytel廬 ST811HS NC010|PA6-I|DuPont