久久久国产精品樱花网站,国产AV福利第一精品,国产亚洲欧洲av综合一区二区三区,久久国语对白,av无码精品一区二区乱子

Product TextsGlass fibre reinforced and heat ageing resistance injection moulding grade, used e.g. for automobile manifols and pedals.

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	45 / *	cm3/10min	ISO 1133
溫度(Temperature)	275 / *	°C	ISO 1133
負載(Load)	5 / *	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.2 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.8 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	11000 / 7200	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	195 / 130	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3.5 / 7	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 3900	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 3300	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	100 / 110	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	90 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	18 / 33	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	13 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	215 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	220 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	220 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	17.5 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	65 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
Oxygen index	22.5 / *	%	ISO 4589-1/-2

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.9 / 6.2	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	210 / 1900	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	210 / 1900	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
電氣強度(Electric strength)	40 / 31	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	- / 450	-	IEC 60112

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	140 / *	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
噴射溫度(Ejection temperature)	165	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

Diagrams allowed water content: .15 % ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

Ultramid? B3WG7|PA6-GF35|BASF