亚洲国产综合精品在线一区,好姑娘6电影在线观看,国产尤物精品自在拍视频首页,精品午夜福利在线视在亚洲,国产欧美va欧美va在线

Ultramid? B3GM35 Q643|PA6-(GF+MD)40|BASF

Product Texts--- ONLY IN THE USA AVAILABLE ---[table]
機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	7960 / *	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	123 / -	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2.7 / -	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	4.1 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	119 / *	°C	ISO 75-1/-2

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.7 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1480 / -	kg/m3	ISO 1183

CharacteristicsRegional AvailabilityNorth AmericaOther text informationInjection moldingMax. Water content: 0.10% If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 degC (176 degF) is recommended. Drying time is dependent on moisture level, but 2-4 hours is generally sufficient. Alternatively, please contact your BASF representative. Packing pressure affects the final It should be applied and maintained until the gate area is completely frozen off. Minimal back pressure should be utilized toSurface appearance is directly affected byChemical Media Resistance

Acids

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94864.html

免責聲明: 本文 Ultramid? B3GM35 Q643|PA6-(GF+MD)40|BASF 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡