亚洲色一区二区三区四区,中文字幕在线精品视频入口一区,亚洲国产精久久久久久久春色,国产一区二区三区禁18,亚洲国产成人精品无码区蜜柚

Ultramid? B3GM35 Q611|PA6-(GF+MD)40|BASF

Product Texts--- ONLY IN THE USA AVAILABLE ---[table]
流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	25 / *	cm3/10min	ISO 1133
溫度(Temperature)	275 / *	°C	ISO 1133
負載(Load)	5 / *	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	8000 / 5000	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	120 / 65	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3 / 12	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 2800	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 1850	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	50 / -	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	50 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8 / -	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	6 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	200 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	215 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	38 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.9 / 6.2	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	200 / 200	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200 / 200	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
相比漏電起痕指數(Comparative tracking index)	- / 400	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.7 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1480 / -	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	130 / *	cm3/g	ISO 307, 1157, 1628

CharacteristicsRegional AvailabilityNorth AmericaOther text informationInjection moldingMax. Water content: 0.10% If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 degC (176 degF) is recommended. Drying time is dependent on moisture level, but 2-4 hours is generally sufficient. Alternatively, please contact your BASF representative. Packing pressure affects the final It should be applied and maintained until the gate area is completely frozen off. Minimal back pressure should be utilized toSurface appearance is directly affected byChemical Media Resistance

Acids

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94849.html

免責聲明: 本文 Ultramid? B3GM35 Q611|PA6-(GF+MD)40|BASF 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡