亚洲av无码国产在丝袜线观看,国产精品久久毛片,精品国产AⅤ无码一区二区,天堂影院一区二区三区四区,国产一级r片内射免费视频

Technyl? eXten D 458P|PA610-I|Rhodia

Technyl? eXten D 458P|PA610-I|Rhodia 物性表: Technyl? eXten D 458P|PA610-I|Rhodia物性表及特性介紹,Technyl? eXten D 458P|PA610-I|Rhodia注塑參數詳情,如需Technyl? eXten D 458P|PA610-I|Rhodia下載, 可到相關下載區下載

Product TextsHigh viscosity unfilled plasticized PA6.10 for extrusion applications providing low end part warpage.

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
成型收縮(Molding shrinkage) (parallel)	3.5 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	3.0 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	800 / 550	MPa	ISO 527-1/-2
Stress at 50% strain	40 / 34	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50 / >50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	87 / 117	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	15 / 19	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	215 / *	°C	ISO 11357-1/-3
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.6 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.5 / *	%	Sim. to ISO 62
密度(Density)	1040 / -	kg/m3	ISO 1183

CharacteristicsSpecial CharacteristicsHigh impact or impact modifiedRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingThe material is supplied in airtight bags, ready fro use. In the case that the virgin material has absorbedmoisture, it must be dried to a final moisture content less than 0,1% with a dehumidified air drying equipment at approximately 80°C. ISO 1817 Liquid 4) (23°C)

Salt solutions

關鍵詞:
Rhodia
PA610-I
Technyl? eXten D 458P

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94662.html

免責聲明: 本文 Technyl? eXten D 458P|PA610-I|Rhodia 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡