亚洲日韩精品一区二区三区无码,两个人的视频www免费,18禁国产一区二区三区,国产精品任我爽爆在线播放6080 ,少妇人妻88久久中文字幕

Technyl? C 548B V15 black|PA6-GF15|Rhodia

Product TextsPolyamide PA6, reinforced with 15% of glass fibre, heat stabilised, hight viscosity, for extrusion-blowing. of deflection under load (1.80 MPa)	185 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	40 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.7 / 4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200 / 1200	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E9	Ohm*m	IEC 60093
電氣強度(Electric strength)	- / 21	kV/mm	IEC 60243-1

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.42 / *	%	Sim. to ISO 62
密度(Density)	1180 / -	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingOther ExtrusionSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityAsia PacificOther text informationInjection moldingIn the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,1% with a dehumidified air drying equipment at approx 80°C. .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94653.html

免責聲明: 本文 Technyl? C 548B V15 black|PA6-GF15|Rhodia 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡