WWW丫丫国产成人精品,秋霞在线观看片无码免费不卡,在线观看无码av五月花,亚洲精品不卡av在线播放 ,人人澡超碰碰97碰碰碰

Novamid? 1013GH30 1 NA/BK701|PA6-GF30|DSM

Product Texts30% Glass Reinforced, Heat Stabilized, Injection Molding16 / *	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.3 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.0 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9600 / 5700	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	170 / 110	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3.3 / 5.6	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	81 / 92	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	12 / 19	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	205 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	220 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	70 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4 / -	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4 / -	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	140 / -	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	210 / -	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13 / -	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 2E14	Ohm	IEC 60093
電氣強度(Electric strength)	27 / -	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	475 / -	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸濕性(Humidity absorption)	2.4 / *	%	Sim. to ISO 62
密度(Density)	1360 / -	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityAsia PacificOther text informationInjection moldingInjection Molding RecommendationsDisclaimerCopyright M-Base .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-93382.html

免責聲明: 本文 Novamid? 1013GH30 1 NA/BK701|PA6-GF30|DSM 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡