夜夜添狠狠添高潮出水,国产成人精品永久免费视频 ,精品国产AⅤ无码一区二区,亚洲午夜理论片在线观看,无卡无码无免费毛片

BERGAMID? B70NATUR 50|PA6|PolyOne

BERGAMID? B70NATUR 50|PA6|PolyOne 物性表: BERGAMID? B70NATUR 50|PA6|PolyOne物性表及特性介紹,BERGAMID? B70NATUR 50|PA6|PolyOne注塑參數詳情,如需BERGAMID? B70NATUR 50|PA6|PolyOne下載, 可到相關下載區下載

Product TextsBERGAMID B70 NATUR 50, PA6 unreinforced,of deflection under load (1.80 MPa)	65 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	170 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	85 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	82 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-2 / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2 / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.7 / 7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	230 / 3000	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
電氣強度(Electric strength)	100 / 60	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	- / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	9.5 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	3 / *	%	Sim. to ISO 62
密度(Density)	1130 / -	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	150 / *	cm3/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	250	°C	ISO 294
Injection Molding, mold temperature	40	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsRegional AvailabilityEuropeOther text informationInjection moldingPREPROCESSING Water Content0,1% ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

關鍵詞:
PA6
PolyOne
BERGAMID? B70NATUR 50

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-92686.html

免責聲明: 本文 BERGAMID? B70NATUR 50|PA6|PolyOne 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡