亚洲一区二区三区四区,精品国产一区二区三区国产馆,亚洲一区二区三上悠亚,亚洲高清一区二区三区,色二av手机版在线

Durethan? DP 1100/30 H2.0|PA6-GB30|LANXESS

0 | PA6-GB30 |LANXESS Product TextsPA 6, 30 % Mikroglass spheres, injection moulding, heat-ageing stabilized, low tendency to warp, improved surface finish

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	85 / *	cm3/10min	ISO 1133
溫度(Temperature)	280 / *	°C	ISO 1133
負載(Load)	5 / *	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	4300 / 1350	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	75 / 35	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	6 / 50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	25 / 150	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	20 / 30	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	3 / 8	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	222 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	70 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	180 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	75 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	75 / *	E-6/K	ISO 11359-1/-2

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density)	1350 / -	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1160	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.223	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2140	J/(kg K)	-
Eff. thermal diffusivity	9.03E-8	m2/s	-
噴射溫度(Ejection temperature)	140	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING Water content: 0.1 % .

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-92678.html

免責聲明: 本文 Durethan? DP 1100/30 H2.0|PA6-GB30|LANXESS 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡