成人欧美一区二区三区在线观看 ,好吊妞,人妻丰满熟妇AV无码区乱,国产精品av免费观看,乱女乱妇熟女熟妇综合网

BERGAMID? B70G45|PA6-GF45|PolyOne

Product TextsBERGAMID B70G45, PA6 reinforced5	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	100 / 110	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	90 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	21 / 30	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	17 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	223 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	213 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	220 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	14 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	55 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.9 / 6.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	180 / 1800	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
電氣強度(Electric strength)	90 / 80	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	- / 500	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.2 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1510 / -	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	150 / *	cm3/g	ISO 307, 1157, 1628

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	270	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingDelivery formPelletsRegional AvailabilityEuropeOther text informationInjection moldingPREPROCESSING Water Content0,1% ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-92286.html

免責聲明: 本文 BERGAMID? B70G45|PA6-GF45|PolyOne 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡