全免费A级毛片免费看无码,国产成人午夜在线视频极速观看,成人中文在线,插插射啊爱视频日a级,一本大道无码av天堂

Akulon? Fuel Lock FL-LP|PA6|DSM

Akulon? Fuel Lock FL-LP|PA6|DSM 物性表: Akulon? Fuel Lock FL-LP|PA6|DSM物性表及特性介紹,Akulon? Fuel Lock FL-LP|PA6|DSM注塑參數詳情,如需Akulon? Fuel Lock FL-LP|PA6|DSM下載, 可到相關下載區下載

Product TextsLow fuel permeation PA6 suitable for use in injection molding/welding of small engine fuel tanks, UV Stabilized of deflection under load (1.80 MPa)	50 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	130 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	120 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	120 / *	E-6/K	ISO 11359-1/-2

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	7 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	2.5 / *	%	Sim. to ISO 62
密度(Density)	1070 / -	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	869	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.22	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2740	J/(kg K)	-
Eff. thermal diffusivity	9.37E-8	m2/s	-

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia PacificOther text informationInjection moldingInjection Molding RecommendationsDisclaimerCopyright M-Base .
[/td][/tr][/table]

關鍵詞:
PA6
DSM
Akulon? Fuel Lock FL-LP

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-91936.html

免責聲明: 本文 Akulon? Fuel Lock FL-LP|PA6|DSM 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡