国产精品亚洲一区二区三区,97国产精品人人爽人人做,高清国产一区二区无遮挡,日本边添边摸边做边爱,国产三级国产精品国产专区

PPH3GF-1|PP-GC10|Washington Penn

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	8	g/10min	ASTM D 1238
模具收縮(Mold Shrinkage) (MD)	0.008	mm/mm	ASTM D 955
密度(Density) (73°F)	980	kg/m3	ASTM D 792
吸水率(Water Absorption) (24hr)	0.05	%	ASTM D 570

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Yield	48.3	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	7	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	3102.64	MPa	ASTM D 790
抗彎強度(Flexural Strength)	72.4	MPa	ASTM D 790
Modulus at 100% Elongation	2.14	MPa	ASTM D 412
Shore A Hardness	62	-	ASTM D 2240
Compression Set(22 hr @ 73 °F)	28	%	ASTM D 395
Compression Set(22 hr @ 158 °F)	35	%	ASTM D 395

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
Max. Service Temp. (Intermittent)	121	°C	ASTM D 2485
Max. Service Temp. (Continous)	121	°C	ASTM D 2485

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	3.9	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.55	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	41	-	ASTM D 150
體積電阻率(Volume Resistivity)	5.30E9	Ohm*cm	ASTM D 257

CharacteristicsProcessingInjection MoldingFeaturesHomopolymerRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base .

關鍵詞:
Washington Penn
PPH3GF-1
PP-GC10

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-89806.html

免責聲明: 本文 PPH3GF-1|PP-GC10|Washington Penn 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡