国产一区二区三区美女,大地资源高清播放在线观看,亚洲AV毛片一区二区三区,国产欧美另类精品久久久,伊人久久大香线蕉网av

Product TextsVESTODUR? X7061 nc DuringProducts made of X7061 permit an efficient andThe characteristic properties of PBT remain unchanged: The emittedBesides an intense contrast, especially in cases of bright colors of the com- The surface of the products is not deteriorated; the goodThe main advantage of the process is the high degree of versatility. That permits cost-effective, 16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	1.6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.6	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2700	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	58	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	8	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	130	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	115	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	4	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	3	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	223	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	45	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	55	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	160	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	190	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	20	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E13	Ohm	IEC 60093
電氣強度(Electric strength)	27	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	300	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.1	%	Sim. to ISO 62
密度(Density)	1340	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1140	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.19	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1700	J/(kg K)	-
噴射溫度(Ejection temperature)	190	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams05 % The drying time is dependentWe recommend a drying time of approximately 5 hours at a temperature ofISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTODUR? X7061 nc (nf)|PBT|Evonik Industries