无码伊人66久久大杳蕉网站谷歌,开心婷婷五月激情综合社区,精品无码国产自产拍在线观看蜜,精品少妇爆乳无码aⅴ区,性XXXX视频播放免费直播

Product TextsVESTODUR? 2000 ncSuitable for extrusion and for injection moulding.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	1.6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.6	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2600	MPa	ISO 527-1/-2
屈服應力(Yield stress)	55	MPa	ISO 527-1/-2
屈服應變(Yield strain)	7	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
Tensile creep modulus (1h)	2600	MPa	ISO 899-1
Tensile creep modulus (1000h)	1500	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	300	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	7	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	6	kJ/m2	ISO 179/1eA
Tensile notched impact strength (+23°C)	100	kJ/m2	ISO 8256/1
Puncture - maximum force (+23°C)	3750	N	ISO 6603-2
Puncture - maximum force (-30°C)	5220	N	ISO 6603-2
Puncture energy (+23°C)	43	J	ISO 6603-2
Puncture energy (-30°C)	57	J	ISO 6603-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	223	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	45	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	55	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	150	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	180	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	20	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	230	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093
電氣強度(Electric strength)	27	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.1	%	Sim. to ISO 62
密度(Density)	1310	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1110	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.19	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1700	J/(kg K)	-
噴射溫度(Ejection temperature)	220	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams05 %The drying time is dependentWe recommend a drying time of approximately 5 hours at a temperature of 05 % The drying time is dependent We recommend a drying time of approximately 5 hours at a temperature of 05 % The drying time is dependentWe recommend a drying time of approximately 5 hours at a temperature of 05 % The drying time is dependentWe recommend a drying time of approximately 5 hours at a temperature ofISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTODUR? 2000 nc (nf)|PBT|Evonik Industries